Dell S520 Projector: Replacing the Dell™ S520 Projector Lamp To replace the lamp: 1 Turn off the projector and disconnect the power cable. Let the projector cool for at least 30 minutes.

Replacing the Dell™ S520 Projector Lamp

The following message appears on the screen when your projector lamp

is approaching its end of life and needs to be changed:

Lamp is approaching the end of its useful life in the operation.

Replacement suggested! www.dell.com/lamps

CAUTION: Before you begin any of the procedures in this section,

follow the Safety Instructions in the user’s manual.

To replace the lamp:

1 Turn off the projector and disconnect the power cable.

WARNING: The lamp becomes very hot when in use. Do not

attempt to replace the lamp until the projector has been allowed

to cool down for at least 30 minutes.

2

Let the projector cool for at least 30 minutes.