Dell POWEREDGE 840: Technical Specifications Processor Expansion Buses Memory Drives
Technical Specifications Processor Expansion Buses Memory Drives: Dell POWEREDGE 840
Table of contents
- Getting Started With Your System
- Notes, Notices, and Cautions
- System Features
- Supported Operating Systems
- Other Information You May Need Obtaining Technical Assistance
- Installation and Configuration Unpacking the System
- Connecting the Keyboard, Mouse, and Monitor Connecting the Power
- Turning on the System Complete the 0perating System Setup
- Technical Specifications Processor Expansion Buses Memory Drives
- Drives (continued) Connectors Video Power
- Power (continued) Physical Environmental
Technical Specifications
Processor
®
Processor type One Intel
Core
™
2 Duo processor
or
®
One Intel Celeron
D, 300 sequence
or
®
One Intel Pentium
4, 600 sequence
Expansion Buses
Bus type PCIe, PCI-X, PCI
Expansion slots
PCIe
One 3.3-V, x1
One 3.3-V, x8
PCI-X Two full-height, full-length, 3.3-V,
64-bit, 133-MHz
PCI One 5-V, 32-bit, 33-MHz
Memory
Architecture 72-bit ECC unbuffered DDR2 533/667 MHz
SDRAM DIMMs, single- or dual-channel
Memory module sockets Four 240-pin
Memory module capacities 512 MB, 1 GB, or 2 GB
Minimum RAM 512 MB (one 512-MB module)
Maximum RAM 8 GB
Drives
Hard Drives
SATA Up to four internal, 1-inch-high (3.5-inch form
factor) drives connected to integrated drive
controller or RAID controller card (non-hot plug)
or SAS backplane (hot plug)
SAS Up to four internal, 1-inch-high (3.5-inch form
factor) drives connected to optional SAS backplane
(hot-plug) or SAS controller card (non-hot plug)
NOTE: Mixing of SATA and SAS drives is not
supported
Getting Started With Your System 9
