Beurer MC 5000: Step 3: Step 4: Step 5:
Step 3: Step 4: Step 5:: Beurer MC 5000
Table of contents
- 1. Intended use 2. Safety notes Electric shock
- Repairs Risk of fire Operation
- 3. Getting to know your device
- 4. Unit description External features Internal features
- Hand switch
- Hand switch button functions Massage programmes Automatic massage programmes Massage programmes
- Concentrated massages Settings
- Position buttons for upright and flat position
- Installation location 5. Initial use Unpacking and assembly Step 1:
- Step 3: Step 4: Step 5:
- Before switching on Starting the massage 6. Operation Flat position/upright position
- Switching off the massage chair Additional settings, operating options 7. Maintenance and storage
- 8. What if there are problems? 9. Technical Data 10. Disposal 11. Warranty and service
24
Step 3:
>
Connect the lower end of the back cushion and the lower end of
the seat cushion using the zip fastening.
>
Lay the seat cushion with the back cushion on the massage chair
over the back rest.
>
Connect the back cushion and the back rest using the
zip fastening.
Step 4:
>
Fold the seat cushion backwards against the back rest.
>
Connect the air hoses behind the seat with the air hoses on the
seat cushion.
Plug the hose marked red into the connection marked red.
Plug the hose marked white into the connection marked white.
>
Replace the seat cushion on the seat.
Important! Do not pinch the hoses. Ensure that the hoses are not
crossed and or kinked.
Step 5:
>
Plug the mains plug into a socket.
>
Switch on the main switch at the bottom of the rear side.
>
Switch on the massage chair at the on/off button on the hand
switch.
The massage chair is now ready for operation.
