Beurer FCE 90: 5. Maintenance and cleaning 6. Replacement parts and wearing parts 7. What if there are problems? 8. Disposal 9. Technical data

5. Maintenance and cleaning

•When you are not using the device, store it in a cool, dry place away from direct light.

•Carefully clean the device after every use with a cleaning cloth. If necessary, use a slightly damp cloth.

Ensure that no water gets inside the device while cleaning it.

•Do not use any cleaning agents or solvents, as they could damage the device.

•Under no circumstances should you hold the device under water, as this can cause liquid to enter and

damage the device.

6. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding service address (according to

the service address list). Please state the corresponding order number.

Item Item number and/or order number

Advanced Hydro Lift Cream (30 ml) 163.392

Intensive Cleansing Milk (200 ml) 163.394

7. What if there are problems?

Problem Cause Solution

The mains adapter is not

Check that the mains adapter is

plugged in correctly.

correctly plugged in.

There is nothing shown in the

device display

The device is not switched on. Press the ON/OFF button.

The mains cable is damaged.

The heat and cool function is

Contact your retailer.

not working

The device is damaged

8. Disposal

Observe the local regulations for material disposal. Dispose of the unit in accordance with EC

Directive 2002/96/EC – WEEE (Waste Electrical and Electronic Equipment). If you have any

questions, please contact the local authorities responsible for waste disposal.

9. Technical data

Model no. FCE 90

Input AC 100-240 V / 50~60 Hz / 0.5 A

Output DC 6.5 V / 2.46 A

14