Hotpoint-Ariston ARMXXD 129: Description of the washer dryer

Description of the washer dryer

Control panel

CONTROL PANEL

GB

LOCK

button

ON/OFF

button

DRYING

SPIN SPEED

Button

Button

DISPLAY

START/

Detergent dispenser

MEMORY

PAUSE

drawer

Button

WASH

FUNCTION

button with

CYCLE

buttons

indicator light

SELECTOR

Buttons

DELAYED

TEMPERATURE

START

Button

Button

Detergent dispenser drawer: used to dispense

TEMPERATURE button : press to decrease the

detergents and washing additives (see Detergents

temperature: the value will be shown on the display.

and laundry).

CONTROL PANEL LOCK button : to activate the

ON/OFF button : press this briefly to switch the

control panel lock, press and hold the button for

machine on or off. The START/PAUSE indicator light,

approximately 2 seconds. When the symbol is

which flashes slowly in a green colour shows that the

illuminated, the control panel is locked. This means it

machine is switched on. To switch off the washer

is possible to prevent wash cycles from being modified

dryer during the wash cycle, press and hold the

accidentally, especially where there are children in the

button for approximately 2 seconds; if the button is

home. To deactivate the control panel lock, press

pressed briefly or accidentally the machine will not

and hold the button for approximately 2 seconds.

switch off. If the machine is switched off during a

wash cycle, this wash cycle will be cancelled.

DELAYED START button : press to set a delayed

start time for the selected wash cycle. The delay time

WASH CYCLE SELECTOR buttons: used to set the

will be shown on the display.

desired wash cycle (see "Table of wash cycles").

DRYING button : press to set a drying cycle.

MEMORY button: press and hold the button to store

a cycle with your own set of preferences in the

START/PAUSE button with indicator light: when the

memory of the machine. To recall a previously stored

green indicator light flashes slowly, press the button to

cycle, press the MEMO button.

start a wash cycle. Once the cycle has begun the

indicator light will remain lit in a fixed manner. To

FUNCTION buttons: press the button to select the

pause the wash cycle, press the button again; the

desired function. The corresponding indicator light on

indicator light will flash in an orange colour. If the

the display will switch on.

symbol is not illuminated, the door may be

opened. To start the wash cycle from the point at

SPIN button : press to reduce or completely

which it was interrupted, press the button again.

exclude the spin cycle - the value is indicated on the

display.

4

Display

GB

A

B

D

C

E

F

The display is useful when programming the machine and provides a great deal of information.

The upper two strings A and B are used to display the selected wash cycle or the type of drying selected, the

current wash cycle phase (the selected dryness level or drying time) and all the indications relating to the progress

status of the cycle.

String C shows the time remaining until the end of the wash cycle in progress and, if a DELAYED START has been

set, the time remaining until the start of the selected wash cycle.

String D shows the maximum spin speed value (this depends on the selected wash cycle); if the wash cycle does

not include a spin cycle, the string remains unused.

String E shows the maximum temperature value which may be selected (this depends on the wash cycle used); if

the temperature of the wash cycle cannot be modified, the string remains unused.

Indicator lights F correspond to the functions and light up when the selected function is compatible with the set

wash cycle.

Door locked symbol

If the symbol is lit, this indicates that the washer dryer door is blocked to prevent it from being opened

accidentally. To prevent any damage from occurring, wait for the symbol to switch itself off before opening the

appliance door.

N.B.: if the DELAYED START function has been activated, the door cannot be opened; pauses the machine by

pressing the START/PAUSE button if you wish to open it.

 The first time the machine is switched on, you will be asked to select the language and the display will

automatically show the language selection menu.

To select the desired language press the TEMPERATURE and SPIN buttons; to confirm the selection press the

DRYING button.

If you wish to select another language, press and hold the DRYING + TEMPERATURE + SPIN buttons

simultaneously for 5 seconds, then repeat the steps listed above.

5