Hotpoint-Ariston AVTL 109: инструкция

Instructions for use

WASHING MACHINE

Contents

GB

GB

Installation, 2-3

GB

ES

PL

CIS

Unpacking and levelling, 2

Electric and water connections, 2-3

English, 1

Polski, 13

ÐÓÑÑÊÈÉ, 25

The first wash cycle, 3

Technical details, 3

Washing machine description, 4-5

ES

CZ

HU

Control panel, 4

How to open and shut the drum, 5

Español, 37

Èeský, 49

Magyar, 61

Leds, 5

Starting and Programmes, 6

Briefly: how to start a programme, 6

Programme table, 6

Personalisations, 7

Setting the temperature, 7

Setting the spin cycle, 7

Functions, 7

Detergents and laundry, 8

Detergent dispenser, 8

Bleach cycle, 8

Preparing your laundry, 8

AVTL 109

Special items, 8

Woolmark Platinum Care, 8

Precautions and advice, 9

General safety, 9

Disposal, 9

Saving energy and respecting the environment, 9

Care and maintenance, 10

Cutting off the water or electricity supply, 10

Cleaning your appliance, 10

Caring for your appliance door and drum, 10

Cleaning the pump, 10

Checking the water inlet hose, 10

Cleaning the detergent dispenser, 10

Troubleshooting, 11

Service, 12

Before calling for Assistance, 12

1

Installation

 Keep this instruction manual in a safe place for

loosening the adjustable front feet (see figure); the

GB

future reference. Should the appliance be sold,

angle of inclination, measured according to the

transferred or moved, make sure the instruction

worktop, must not exceed 2°.

Levelling your appliance correctly will provide it with

manual accompanies the washing machine to inform

stability and avoid any vibrations, noise and shifting

the new owner as to its operation and features.

during operation. If it is placed on a fitted or loose

carpet, adjust the feet in such a way as to allow

 Read these instructions carefully: they contain vital

enough room for ventilation beneath the washing

information on installation, use and safety.

machine.

Unpacking and levelling

Putting your appliance in place and moving it.

If your washing machine

Unpacking

is equipped with a

special set of retractable

1. Unpack the washing

wheels you can easy

machine.

move it. To lower the

wheels and thus move

2. Check whether the

the appliance effortlessly,

washing machine has

just pull the lever,

been damaged during

situated on the left-hand

transport. If this is the

side beneath the base.

case, do not install it

Once the appliance is in

and contact your

the required position, put

the lever back in place. The washing machine is now

retailer.

firmly in place (see figure).

3. Remove the four

protective screws and

the rubber washer with

Electric and water connections

the respective spacer,

situated on the rear of

Connecting the water inlet hose

the appliance (see

figure).

1. Insert seal A into the

end of the inlet hose and

4. Seal the gaps using the plastic plugs provided.

screw the latter onto a

5. Keep all the parts: you will need them again if the

cold water tap with a 3/4

gas threaded mouth (see

washing machine needs to be moved to another

figure).

location.

A

Before making the

connection, allow the

Warning: should the screws be re-used, make sure

water to run freely until it

you fasten the shorter ones at the top.

is perfectly clear.

 Packaging materials are not children's toys.

2. Connect the other end

of the water inlet hose to

the washing machine,

Levelling

screwing it onto the

Your machine may make a considerable amount of

appliance's cold water

inlet, situated on the top

noise if the two front feet have not been adjusted

right-hand side on the rear

correctly

of the appliance

1. Install the washing

(see figure).

machine on a flat sturdy

3. Make sure there are

floor, without resting it

no kinks or bends in the

up against walls,

hose.

furniture cabinets or

other.

 The water pressure at the tap must be within the

2. If the floor is not

values indicated in the Technical details table

perfectly level, compen-

(on the next page).

sate for any unevenness

 If the water inlet hose is not long enough, contact

by tightening or

a specialist store or an authorised serviceman.

2

Connecting the drain hose

GB

Connect the drain hose,

 When the washing machine is installed, the main

without bending it, to a

socket must be within easy reach.

draining duct or a wall

drain situated between

 Do not use extensions or multiple sockets.

65 and 100 cm from

65 - 100 cm

the floor;

 The power supply cable must never be bent or

dangerously compressed.

 The power supply cable must only be replaced by

an authorised serviceman.

Warning! The company denies all liability if and when

alternatively, place it

these norms are not respected.

over the edge of a

basin, sink or tub,

The first wash cycle

fastening the duct

supplied to the tap (see

Once the appliance has been installed, and before

figure). The free end of

you use it for the first time, run a wash cycle with

the hose should not be

detergent and no laundry, setting the 90°C

underwater.

programme without a pre-wash cycle.

 We advise against the use of hose extensions; in

case of absolute need, the extension must have the

same diameter as the original hose and must not

Technical details

exceed 150 cm in length.

Model

AVTL 109

40 cm wide

Electric connection

Dimensions

85 cm high

60 cm deep

Before plugging the appliance into the mains socket,

Capacity

from 1 to 5 kg

make sure that:

 the socket is earthed and in compliance with the

Electric

Please refer to the technical data plate

applicable law;

connections

fixed to the machine.

maximum pressure 1 MPa (10 bar)

Water

 the socket is able to sustain the appliance's

minimum pressure 0.05 MPa (0.5 bar)

connections

maximum power load indicated in the Technical

drum capacity 42 litres

details table (on the right);

Spin speed

up to 1000 rpm

 the supply voltage is included within the values i

Control

ndicated on the Technical details table

programmes

programme 3; temperature 60°C;

(on the right);

according to EN

run with a load of 5 kg.

60456 directive

 the socket is compatible with the washing

machine's plug. If this is not the case, replace the

This appliance is compliant with the

following European Community

socket or the plug.

Directives:

- 89/336/CEE of 03/05/89

 The washing machine should not be installed in an

(Electromagnetic Compatibility) and

outdoor environment, not even when the area is

subsequent amendments

- 2006/95/CE (Low Voltage)

sheltered, because it may be very dangerous to

- 2002/96/CE

leave it exposed to rain and thunderstorms.

3