Hotpoint-Ariston ECOT7D 1492: инструкция

Раздел: Бытовая, кухонная техника, электроника и оборудование

Тип: Стиральная Машина

Характеристики, спецификации

Тип загрузки:
вертикальная
Тип машины:
автомат
Тип управления:
электронный
Материал изготовления бака:
пластик
Размеры (ВхШхГ):
85x60x40 см
Вес устройства:
63 кг
Класс стирки:
A
Класс отжима:
B
Класс электропотребления:
A
Расход воды за стирку:
57 л
Макс. загрузка при стирке:
7 кг
Интеллектуальная стирка:
есть
Предварительная стирка:
есть
Дополнительное полоскание:
есть
Кол-во программ стирки:
15
Скорость отжима:
1400 об/мин
Сушка:
нет
Дисплей:
есть
Защита от протечек:
есть
Контроль баланса:
есть
Контроль пенообразования:
есть
Отложенный старт:
есть

Инструкция к Стиральной Машине Hotpoint-Ariston ECOT7D 1492

Instructions for use

WASHING MACHINE

Contents

GB

Installation, 2-3

GB

IT

DE

Unpacking and levelling

Connecting the electricity and water supplies

English, 1

Italiano, 13

Deutsch, 25

The first wash cycle

Technical data

GR

RU

KZ

Care and maintenance, 4

Cutting off the water or electricity supply

ÅëëçíéêÜ, 37

, 49

Қазақша, 61

Cleaning your appliance

Caring for your appliance door and drum

Cleaning the pump

Checking the water inlet hose

How to clean the detergent dispenser

Precautions and tips, 5

General safety

Disposal

ECOT7D 1492

Saving energy and respecting the environment

Description of the washing machine, 6-7

Control panel

Display

How to open and shut the drum

Running a wash cycle, 8

Load balancing system

Wash cycles and functions, 9

Table of wash cycles

Wash functions

Detergents and laundry, 10

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Troubleshooting, 11

Service, 12

1

Installation

! Keep this instruction manual in a safe place for

If it is placed on a fitted or loose carpet, adjust

GB

future reference. Should the appliance be sold,

the feet in such a way as to allow enough room

transferred or moved, make sure the instruction

for ventilation beneath the washing machine.

manual accompanies the washing machine to

inform the new owner as to its operation and

features.

Electric and water connections

Connecting the water inlet hose

! Read these instructions carefully: they contain

vital information on installation, use and safety.

1. Connect the supply

pipe by screwing it to

Unpacking and levelling

a cold water tab using

a ¾ gas threaded con-

Unpacking

nection (see figure).

1. Unpack the washing machine.

Before performing the

2. Check whether the washing machine has been

connection, allow the

damaged during transport. If this is the case, do

water to run freely until

not install it and contact your retailer.

it is perfectly clear.

3. Remove the four pro-

tective screws and the

rubber washer with the

2. Connect the other

respective spacer, si-

end of the water inlet

tuated on the rear of the

hose to the washing

appliance (see figure).

machine,

4. Seal the gaps using the

screwing it onto the ap-

plastic plugs provided.

pliance’s cold water in-

5. Keep all the parts: you

let, situated on the top

will need them again if

right-hand side on the

the washing machine

rear of the appliance

needs to be moved to

(see figure).

another location.

3. Make sure there are no kinks or bends in the

Warning: should the

hose.

screws be re-used,

make sure you fasten

! The water pressure at the tap must be within

the shorter ones at the top.

the values indicated in the Technical details

! Packaging materials are not children’s toys.

table (on the next page).

! If the water inlet hose is not long enough,

Levelling

contact a specialist store or an authorised

1. Install the washing machine on a flat sturdy

serviceman.

floor, without resting it up against walls, furniture

! Never use hoses that have already been used.

cabinets or other.

2. If the floor is not per-

fectly level, compensate

for any unevenness by

tightening or loosening

the adjustable front feet

(see figure); the angle

of inclination, measu-

red according to the

worktop, must not ex-

ceed 2°.

Levelling your appliance

correctly will provide it with stability and avoid any

vibrations, noise and shifting during operation.

2

Connecting the drain hose

! Do not use extension cords or multiple sockets.

GB

Connect the drain

! The cable should not be bent or compressed.

hose, without bending

it, to a drainage duct

! The power supply cable must only be replaced

or a wall drain located

by authorised technicians.

at a height between

65 and 100 cm from

Warning! The company shall not be held respon-

the floor;

sible in the event that these regulations are not

respected.

The first wash cycle

alternatively, rest it on

the side of a washba-

Once the appliance has been installed, and

sin or bathtub, faste-

before you use it for the first time, run a wash

ning the duct sup-

cycle with detergent and no laundry, using the

plied to the tap (see

wash cycle (60°C).

figure). The free end

of the hose should

not be underwater.

Technical details

Model

ECOT7D 1492

! We advise against the use of hose extensions;

40 cm wide

if it is absolutely necessary, the extension must

Dimensions

85 cm high

have the same diameter as the original hose and

60 cm deep

must not exceed 150 cm in length.

Capacity

from 1 to 7 kg

Electrical connections

Please refer to the technical

Electric

Before plugging the appliance into the electricity

data plate fixed to the ma-

connections

socket, make sure that:

chine.

maximum pressure 1 MPa

the socket is earthed and complies with all

Water

(10 bar) minimum pressure

applicable laws;

connections

0.05 MPa (0.5 bar) drum

capacity 42 litres

the socket is able to withstand the maximum

power load of the appliance as indicated in the

Spin speed

up to 1400 rpm

Technical data table (see opposite);

Test wash

the power supply voltage falls within the va-

cycles in

Programme

(1° press of

lues indicated in the Technical data table (see

accordan-

the button): Cotton standard

opposite);

ce with

60°C;

directives

Programme (2° press of

the socket is compatible with the plug of the

1061/2010

the button): Cotton standard

washing machine. If this is not the case, repla-

and

40°C.

ce the socket or the plug.

1015/2010

! The washing machine must not be installed

This appliance is compliant

outdoors, even in covered areas. It is extremely

with the following European

dangerous to leave the appliance exposed to

Community Directives:

rain, storms and other weather conditions.

- 2004/108/CE (Electroma-

gnetic Compatibility)

! When the washing machine has been installed,

- 2006/95/CE (Low Voltage)

the electricity socket must be within easy reach.

- 2012/19/EU

3

65 - 100 cm

Оглавление

Аннотация для Стиральной Машиной Hotpoint-Ariston ECOT7D 1492 в формате PDF