Braun Satin Hair EC 2: English

English: Braun Satin Hair EC 2

English

Our products are engineered to meet the highest standards of

quality, functionality and design. We hope you thoroughly enjoy

your new Braun appliance.

Please read these use instructions carefully before use and keep

them for future reference.

Important

Plug your appliance into an alternating current () outlet only and

make sure that your household voltage corresponds to the

voltage printed on the appliance.

This appliance must never be used near water (e.g. a filled

wash basin, bathtub or shower). Do not allow the appliance

to get wet. Always unplug it after use.

For additional protection, it is advisable to install a residual

current device (RCD) with a rated residual operating current not

exceeding 30 mA in the electrical circuit of your bathroom. Ask

your installer for advice.

This appliance is not intended for use by children or persons with

reduced physical, sensory or mental capabilities unless they are

given supervision by a person responsible for their safety.

Keep out of reach of children.

Be careful to avoid that the hot surfaces of the appliance get into

direct contact with the skin, in particular of the ears, face or neck.

When hot, do not place on surfaces that are not heat-resistant.

Do not wrap the mains cord around the appliance. Regularly

check the mains cord for wear of damage. If the cord is

damaged, stop using the appliance.

If the complete display flashes, this indicates an internal error of

the appliance. In this case, take the appliance to a Braun Service

Centre for checking. Unqualified repair work can lead to extreme

hazards for the user.

The appliance should be used on dry hair only.

Description

1 Cool tip

2 Tong with clamp

3 Ionic nozzle

4 Tong opener

5 LC Display

6 Hair type selector

7 On/off button

8 Swivel cord (2 m length)

Colour Saver Technology

Colour Saver Technology with satin ions maintains the precious

health of colored hair as it protects your hair from dry out and

damage and prevents moisture loss of coloured hair by up to 50%

while styling. As satin ions are released onto your hair a slight

crackling noise can be heard.

For beautiful bouncy curls and waves that look more healthy and

radiantly vibrant for longer.

* compared to usage of an appliance without Colour Saver

Technology

Microprocessor supported styling

Thanks to its sophisticated microprocessor and its LC control

display the Braun Satin Hair Colour Styler intuitively guides you to

the accurate temperature for fine, normal or thick coloured hair.

Personalized settings: Using the hair type selectors [6] you can

adjust the temperature for fine, normal and thick hair. For medium

and thick hair type, you have the choice between a low and high

setting.

Getting started

Connect the appliance to an electrical outlet and push the on/off

button [7] for 1 second to turn it on.

During heat-up, the display shows three flashing segments

(Fig. A).

After approximately 45 seconds, the default temperature for

normal hair is reached and you can start using the appliance.

Using the hair type selectors [6], choose your preferred setting.

When changing the setting the segments will flash. The segments

will shine permanently when the selected setting is reached.

6

98575470_EC2.indd 698575470_EC2.indd 6 27.02.2008 10:26:36 Uhr27.02.2008 10:26:36 Uhr

Styling

Preparing for use

Make sure your hair is completely dry before using the appliance.

Comb your hair with a wide-toothed comb to remove tangles.

Section your hair off. Starting at the hair tips, clamp a section of

hair (strand of 3-4 cm max.) with the tong.

Creating curls and waves

Gently wind the strand up to the roots. Allow the strand to remain

curled up for a couple of seconds before unwinding it. For best

results, slightly press the tong opener [4] in order to smoothly

release the strand. For better handling, you may hold the cool

tip [1] with your other hand.

You can even straighten a strand that already has been curled

by clamping the strand at the roots again and then letting the

appliance glide slowly and carefully along the strand towards the

hair tips.

For safety reasons, the appliance will automatically turn off after

approximately 30 minutes.

Simply press the on/off button [7] again in case you may want to

continue using the appliance.

After use

After each use, switch off the appliance by pushing the on/off

button [7] for one second.

Keep in mind that the heating barrel is still hot. Do not touch it to

avoid any risk of burns. After 20 minutes cooling time, you will be

able to touch the heating barrel without any risk.

During use and cooling down, the appliance always has to be

placed on a heat-resistant surface.

Cleaning

Always unplug before cleaning. Never immerse the appliance in

water.

Clean the appliance with a damp cloth and use a soft cloth to

dry.

Subject to change without notice.

This product conforms to the European Directives EMC

2004/108/EC and Low Voltage 2006/95/EC.

Please do not dispose of the product in the household

waste at the end of its useful life. Disposal can take place

at a Braun Service Centre or at appropriate collection

points provided in your country.

7

98575470_EC2.indd 798575470_EC2.indd 7 27.02.2008 10:26:37 Uhr27.02.2008 10:26:37 Uhr