Dell PowerEdge M605: HBA LEDs (Excludes the QME2462 HBA) Troubleshooting and Technical Support Warranty Laser Safety (Excludes QME2462 and QME2472)

HBA LEDs (Excludes the QME2462 HBA)

QLA234x/QLE220 HBA LED Scheme QME2472 HBA LED Scheme*

Green LED Amber LED Activity Green LED Amber LED Activity

❍❍Power off Flashing ❍ 4 Gbps

●●Power ❍ Flashing

1 Gbps or 2Gbps

●❍Online

❍● Link

For more information, please refer to your

established

Server Hardware Owner’s Manual

❍ Flashing Loss of

*

LEDs located on Fibre Channel Passthru Module

synchronization

Alternate

Alternate

Firmware error

flashing

flashing

Flashing ❍ Beacon

QLE246x HBA LED Scheme

Yellow LED Green LED Amber LED Activity

❍ ❍ ❍ Power off

● ● ● Power on (before firmware init)

Flashing Flashing Flashing Power on (after firmware init)

Yellow, Green and Amber LEDs flashing alternately Firmware error

❍ ❍ ●/Flashing Online, 1-Gbps link established

❍ ●/Flashing ❍ Online, 2-Gbps link established

●/Flashing ❍ ❍ Online, 4-Gbps link established

Flashing ❍ Flashing Beacon

Troubleshooting and Technical Support

The QLogic knowledge database contains troubleshooting information for the QLogic SANblade HBAs. Access the data

base from the QLogic web site www.qlogic.com/support/knowledge_base.asp.

For technical support, visit our web site support.qlogic.com,

email us at support@qlogic.com, or call at 952-932-4040.

Warranty

The QLogic SANblade HBA comes with a standard three year QLogic warranty, or as specified by other agreements.

Please check the QLogic Web site at www.qlogic.com

for warranty details.

Laser Safety (Excludes QME2462 and QME2472)

FDA Notice

This product complies with DHHS Rules 21CFR Chapter I, Subchapter J. This product has been designed and manufactured according to

IEC60825-1 on the safety label of laser product.

4