Beurer LB 88: 10. What if there are problems? 11. Technical data
10. What if there are problems? 11. Technical data: Beurer LB 88
Table of contents
- Included in delivery
- 1. Signs and symbols 2. Getting to know your instrument 3. Intended use
- 4. Safety notes Electric shock Repairs Risk of fire Risk of scalding
- Handling Disposal
- 5. Unit description 6. Initial use Fill with water
- Positioning the device 7. Operation 8. Cleaning and storage
- Cleaning the ultrasound membrane with a brush, rinsing the base Clean the water evaporation pan
- Rinsing the water tank, replacing the water Clean the air humidifier inside and out
- Storage 9. Replacement parts
- 10. What if there are problems? 11. Technical data
- 12. Replacement items
10. What if there are problems?
Problem Cause Solution
The operating loop
The mains cable is not plugged in. Connect the plug.
does not light up.
The control dial is at its minimum
Turn the control dial clockwise towards the ma-
position.
ximumposition.
No LED display. The mains cable is not plugged in. Connect the plug.
The control dial is at its minimum
Turn the control dial clockwise towards the ma-
position.
ximumposition.
Red LED display.
Thewaterlevelistoolow;thewater
Fillthewatertank.
tank is empty.
No mist is produced.
The LED display lights up red. Fillthewatertank.
The LED display does not light up. Connect the plug.
The mist has a
Thedeviceisnew. Removethewatertank,turnthescrewedplug
strange smell.
andremoveit.
Air the open, empty water tank in a cool, dry
placefortwelvehours.
Stale or dirty water. Empty the base unit and the water tank and
clean them thoroughly.
Fillthewatertankwithfreshwater.
Strange noise. The water tank is not positioned
Lift up the water tank and position it correctly
correctly on the base unit.
on the base unit.
The tank should sit tightly on the base unit.
Strange noise. There is too little water in the water
Fillthewatertank.
tank.
Thedeviceisnotlevelandunstable.
Placethedeviceonafirm,levelsurface.
Mist escapes from
The water tank is not positioned
Lift up the water tank.
underneath the
correctly on the base unit.
Check whether the join between the base unit
water tank.
and water tank is clean.
Clean if required.
Position the water tank correctly on the base
unit.
The tank should sit tightly on the base unit.
11. Technical data
Dimensions(LxWxH) Approx.29.5cmx19.5cmx28cm
Cable length Approx.1.4m
Weight when empty Approx.2.24kg
Mainsvoltage/frequency 220-240VAC/50/60Hz
Nominal power 280W
2
Room size Upto48m
Maximumcapacity Approx.6litres
Evaporationoutput 550ml/hour
Signs and symbols
The unit is double-protected and thus corresponds to protec-
tion class 2.
22
