Beurer BY 84: 9. Changing the batteries 11. In the event of problems Faults Action 10. Care and storage
9. Changing the batteries 11. In the event of problems Faults Action 10. Care and storage: Beurer BY 84
Table of contents
- ENGLISH
- 2. Proper use 1. Getting to know your appliance
- 3. Important information Safety information General notes
- Notes on the use of batteries
- Parent unit 4. Appliance description Baby unit
- Baby unit / Parent unit 5. Start-up Setting the pilot tone Display
- Rechargeable battery operation / disposable battery operation Mains operation 6. Operation Preparing the device for first use
- 7. Settings Noise sensitivity (Baby unit) Volume (Parent unit) 8. Useful information about the baby monitor
- 9. Changing the batteries 11. In the event of problems Faults Action 10. Care and storage
- Faults Action Faults Action 12. Disposal
- 13. Technical details
high up as possible near a door or win-
dow and ensuring that the batteries are
CAUTION
not too weak.
•
Remove the batteries if the device is not
•
Other radio waves can interfere with the
in use for an extended period.
transmission of the baby monitor. There-
•
Protect the devices from knocks, damp,
fore, do not position the baby monitor
dust, chemicals, drastic changes in tem-
near devices such as microwaves, WLAN
perature, electromagnetic fields and
etc. The following other factors can inter-
nearby sources of heat (ovens, heaters).
fere with the baby monitor’s transmis-
•
After use, before cleaning and chang-
sion or shorten its range: Furniture, walls,
ing any accessory parts, the power unit
houses, trees, environmental factors (such
should always be disconnected.
as fog, rain).
•
If dirty, wipe the device with a soft, dry
cloth.
9. Changing the batteries
•
Clean the devices with a dry cloth.
The devices have a battery level indicator
•
Do not use any abrasive cleaning prod-
in the display. If the batteries are too weak,
ucts.
the devices switch off automatically and
you should change the batteries.
11. In the event of problems
Faults Action
Note
Displays do
Check whether
When changing the batteries, use batter-
not illuminate
•
the relevant adapter plug is pro-
ies of the same type, make and capacity.
after switching
perly plugged in,
Always change all batteries at the same
on.
•
the batteries are charged/not
too weak,
time. Use batteries free from heavy metals.
•
the batteries have been cor-
rectly inserted.
10. Care and storage
The service life of the device depends on
its careful handling:
21
