Dell PowerVault MD3000: Power Supplies Available Physical Disk Power (Per Slot) Physical
Power Supplies Available Physical Disk Power (Per Slot) Physical: Dell PowerVault MD3000
Table of contents
- Notes, Notices, and Cautions
- System Features
- Other Information You May Need Obtaining Technical Assistance Installation and Configuration
- Unpacking the System Installing the Rails and System in a Rack
- Connecting the Power Cables Attaching the Power Cord Retention Bracket
- Turning on the System Installing the Bezel
- Technical Specifications Disks RAID Controller Modules RAID Controller Back-Panel Connectors Backplane Board LED Indicators
- Power Supplies Available Physical Disk Power (Per Slot) Physical
- Environmental (Enclosure) Environmental (Battery Backup Unit [BBU])
RAID controllers The following single-color LEDs:
• Battery fault
• Cache active
• Controller fault
• Controller power
• Ethernet link
• Ethernet activity
• SAS Out fault
• SAS Out active
• SAS In fault (2 if additional In connector installed)
• SAS In active (2 if additional In connector installed)
Power supply/cooling fan
3 LED status indicators for power supply status, power supply/fan
module
fault, and AC status
Power Supplies
Wattage 488 W maximum continuous; 550 W peak
Heat dissipation 200 W
Voltage 100–240 V rated (actual 90–264 V)
Frequency 47–63 Hz
Amperage 7.2 A at 100 V, 3.6 A at 200 V
Available Physical Disk Power (Per Slot)
Supported physical-disk power
up to 1.3 A at +12 V
consumption
up to 1.5 A at +5 V
Physical
Height 13.11 cm (5.16 inches)
Width 44.63 cm (17.57 inches)
Depth 48.01 cm (18.9 inches)
Weight (maximum
35.37 kg (78 lb)
configuration)
Getting Started With Your System 9
