Beurer MPE 70: 8. Cleaning 9. Replacement parts and wearing parts 10. Disposal 11. Technical data

8. Cleaning

Important

Ifthedeviceisonlybeingusedbyoneperson,changetheparaffinwaxatregularintervalsand

clean the paraffin bath whilst doing so.

Ifthedeviceisbeingusedbyseveralpeople,theparaffinwaxshouldbechangedbeforeeach

treatment for reasons of hygiene.

•Pullthemainsplugoutofthesocket.

•Taketheprotectivegrilleoutoftheparaffinbath.

•Allowtheparaffinwaxtosolidifyovernight.

Warning

Donotuseanysharporpointedobjectstoremovethe

wax block from the paraffin bath. You could damage or

scratch the paraffin bath.

•Iftheparaffinwaxhassolidified,pressononeend

of the wax block and lift it out of the paraffin bath.

Ifthewaxblockcannotberemovedeasily,turnthe

temperaturecontrollerto“warm”fortenminutes.Then

removethemainsplugandtakethewaxblockoutof

the paraffin bath.

•Thenwipetheinsideoftheparaffinbathdrywitha

clean towel.

Important

Neverfilltheparaffinbathwithwaterinordertocleanit.

•Aftercleaning,storetheparaffinbathinacool,dryand

dust-proof place.

9. Replacement parts and wearing parts

Item and/or order number

2x450gofparaffinwax+30plasticsleevers 589.42*

*

Commerciallyavailableorfromthecorrespondingserviceaddress(accordingtotheserviceaddresslist)

10. Disposal

PleasedisposeofthedeviceinaccordancewithECDirective–WEEE(WasteElectricaland

Electronic Equipment).

Ifyouhaveanyqueries,pleasecontacttheappropriatelocalauthorities.

11. Technical data

Model no. MPE 70

Voltage supply 220-240V~50/60Hz

Output 80W

Protection class

II /

, IPX0

Dimensions (L x W x H) 33 x 25 x 18 cm

Weight 1 kg

16