Beurer HDE 10: 5. Unit description 6. Operation Warning

5. Unit description

1 Removable,rotatingprofessionalnozzle

1 2

2 Protective grille with lint fi lter

3 Folding device handle

4 Sliding switch with three settings:

0O

1 Low air fl ow, warm air

2 High air fl ow, hot air

3

5 Anti-kinkprotectionwithhangingeyelet

4

6 Mains cable

7

7 Voltageswitchover

5

6

6. Operation

• Make sure that your hands are dry!

Important

• Dry your hair with a towel beforehand.

•Setthecorrectoperatingvoltage(100-120V

•Theprofessionalnozzle[1]anddevicemay

or220-240V)beforeusingthedeviceforthe

become very hot depending on the switch

fi rst time.

settingandperiodofuse–riskofburnsand

fi r e !

• If you do not know the local mains voltage,

request it from the relevant organisation.

•Donottouchtheprofessionalnozzle[1].

•Donotjamthemainscable[6]indrawersor

•Allowtheprofessionalnozzle[1]tocooldown

doors, for example.

before removing it.

•Untanglethemainscable[6]ifitistwisted.

• Place the device on fi reproof surfaces only.

• Do not pull, twist or bend the mains cable

• Ensure that no highly fl ammable liquids are

[6]anddonotpullorrouteitover/onsharp,

located near the device.

pointedobjectsorhotsurfaces.

•Donotusethedeviceonsynthetichair–risk

of fi re!

• Ensure that no hair can be directly sucked into

Warning

the device.

•Positionyourselfonadry,non-conductive

surface.

12