Beurer BC 30: 8. Cleaning and Care 9. Technical details
8. Cleaning and Care 9. Technical details: Beurer BC 30
Table of contents
- 2. Important information 1. Getting to know your instrument
- Advice on use
- Storage and Care Repair and disposal Advice on batteries
- 3. Unit description 4. Prepare measurement
- 5. Measuring blood pressure
- Evaluating results
- 6. Measurements 7. Error message / troubleshooting
- 8. Cleaning and Care 9. Technical details
- This device is in line with the EU Medical Devices Directive

•
: errors during measuring,
Memory 3 x 40 memory spaces
•
: the pump pressure is higher than 300 mmHg,
Dimensions L 70 mm x W 72 mm x H 28,6 mm
•
: errors in the recorded measurement data,
•
: there is a system or unit error.
Weight Approx. 112 g (without batteries)
Cuff size 135 to 195 mm
In such cases, repeat the measurement. Ensure that you do
not move or speak.
Permissible operat-
+ 5 °C to +40 °C, 15 – 93 % relative air
If necessary, reinsert or replace the batteries.
ing conditions
humidity (non-condensing)
Permissible storage
-25 °C to +70 °C, ≤ 93 % relative air
8. Cleaning and Care
conditions
humidity, 700 –1060 hPa ambient
•
Clean your blood pressure monitor carefully using a slightly
pressure
damp cloth only.
Power supply
2 x 1,5 V
AAA batteries
•
Do not use any detergents or solvents.
•
Never hold the instrument under water as otherwise liquid
Battery life For approx. 250 measurements,
can penetrate and damage the instrument.
depending on the blood pressure level
•
Never place any heavy objects on the instrument.
and/or pump pressure
Accessories Instruction for use, 2 x 1.5 V AAA batter-
9. Technical details
ies, storage box
Model no. BC 30
Classification Internal supply, IPX0, no AP or APG,
Measurement
Oscillometric, non-invasive blood pres-
continuous operation, type BF applied
method
sure measurement on the wrist
part
Measurement
Cuff pressure 0 – 300 mmHg,
Technical information is subject to change without notifica-
range
systolic 40 – 280 mmHg,
tion to allow for updates.
diastolic 40 – 280 mmHg,
Pulse 40 –199 beats/minute
•
This unit is in line with European Standard EN 60601-1-2
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
and is subject to particular precautions with regard to elec-
pulse ± 5 % of the value shown
tromagnetic compatibility (EMC). Please note that port-
able and mobile HF communication systems may inter-
Measurement
Max. permissible standard deviation
fere with this unit. More details can be requested from the
inaccuracy
according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
19

