Beurer WL 32: 9. What if there are problems? 10. Technical data 8. Disposal

• Never immerse the device or mains part plug in water or

contains lead, Cd = Battery contains cadmium, Hg = Bat-

other liquids.

tery contains mercury.

• Protect the device from knocks, damp, dust, chemicals,

9. What if there are problems?

marked temperature fluctuations, and nearby sources of

heat (ovens, heaters).

If the time is not displayed correctly or the device does not

• Clean the device with a dry cloth.

function correctly, the cause may be attributed to electro-

• Do not use any abrasive cleaning products.

static discharge or other faults. Therefore, do not position

• Always replace all batteries at the same time and use bat-

the device near to other devices, such as WLAN etc. To

teries of the same type. Do not use rechargeable batteries.

remedy the problem, reset the device to the factory settings.

• Leaking batteries may damage the device. If you do not

To reset the device to the factory settings, press in the

intend to use the device for longer periods, remove the

reset button on the underside of the device using a poin-

batteries from the battery compartment.

ted object.

• Leaking or damaged batteries may burn the skin therefore

If the problem persists, contact Customer Services.

use suitable protective gloves if this is the case.

10. Technical data

8. Disposal

Wake-up light function OFF, 15, 30 minutes before

Please dispose of the device in accordance with

alarm

EC Directive – WEEE (Waste Electrical and Electro-

nic Equipment).

Snooze duration 5 to 60 minutes

If you have any queries, please contact the appropriate

Goodnight function Choose between 5, 10, 15,

local authorities.

30, 45, 60, 75, 90 minutes and

The empty, completely flat batteries should be disposed of

OFF.

through specially designated collection boxes, recycling

points or electronics retailers. You are legally required to

Dimensions 12.3 x 12 cm

dispose of the batteries.

Weight 180 g

Note: The codes below are printed on batteries

containing harmful substances: Pb = Battery

Mains part

Input: 100-240 V, AC / 50/60 Hz

Voltage supply

Output: 5.5 V, DC/500 mA

21