Beurer TL 80: 7. Replacing the lamp tubes/starter 8. Cleaning and care of the unit 9. Disposal 10. Technical specifications

7. Replacing the lamp tubes/starter

The service life of the fluorescent tubes is on average 10,000 hours. If one tube needs replacing, both fluo-

rescent tubes must be replaced with new tubes of the same type. For this purpose, contact a retailer, an

authorised service centre or appropriately qualified personnel or contact the customer service.

The following tubes are approved as replacement:

• Philips – PL-L36W/865/4P

• The manufacturer’s tubes are available with the order number 162.942 from customer support

Warning

• For environmental reasons, do not dispose of the fluorescent tubes with the household waste. Dis-

pose of the unit at a suitable local collection or recycling point. Please contact the local authorities

responsible for waste disposal.

• Unplug the device, to avoid the risk of electrocution.

• Take care when handling fluorescent tubes to avoid the risk of cut injuries.

8. Cleaning and care of the unit

The unit should be cleaned occasionally.

Important

• Ensure that no water penetrates inside the unit!

Before you clean the unit, always switch it off, unplug it and let it cool off.

• Do not wash the unit in a washing machine!

Clean using a damp cloth, to which you can apply a little detergent if necessary.

• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed

onto the unit. The unit must be operated only when it is completely dry.

Do not use abrasive detergents and never immerse the unit in water.

9. Disposal

In the interest of protecting the environment, the unit must not be thrown out with the household

waste at the end of its service life. Dispose of the unit at a suitable local collection or recycling

point.

Dispose of the device in accordance with EC Directive 2002/96/EC – WEEE (Waste Electrical and

Electronic Equipment). If you have any questions, please contact the local authorities responsible for wa-

ste disposal.

10. Technical specifications

Dimensions (WHD) 310 x 255 x 555 mm

Weight

2,7 kg

Lighting elements FSL-YDW-36HRR

Power 72 watts

Light intensity 10,000 lux (15-20 cm)

Radiation Output of radiation beyond the visible spectrum

(infrared and UV) is so low that it is harmless to

eyes and skin.

Product classification Protection against moisture: IP20

Electrical protection class: class I

Mains connection 230 V ~, 50 Hz

12