Beurer TL 60: 9. Storage 10. Disposal 11. What if there are problems? 12. Technical specifications
9. Storage 10. Disposal 11. What if there are problems? 12. Technical specifications: Beurer TL 60
Table of contents
- 1. About the daylight lamp 2. Why use a daylight lamp? Signs and symbols
- 3. Notes Safety notes General notes Repairs
- 4. Unit description 5. Initial use 6. Operation 1 Switching on the lamp 2 Enjoying the light
- 3 Important instructions 4 Enjoying light over longer periods 5 Switching off the lamp 7. Cleaning and care of the unit 8. Replacing the lamp tubes/starter If you determine that your unit has a defective tube, you can replace it yourself. To do so, proceed as follows:
- Replacing the starter:
- 9. Storage 10. Disposal 11. What if there are problems? 12. Technical specifications

9. Storage
If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out
of the reach of children.
10. Disposal
In the interest of protecting the environment, the unit must not be thrown out with the household
waste at the end of its service life. Dispose of the unit at a suitable local collection or recycling point.
Dispose of the device in accordance with EC Directive 2002/96/EC – WEEE (Waste Electrical and
Electronic Equipment). If you have any questions, please contact the local authorities responsible for
waste disposal.
11. What if there are problems?
Problem Possible cause Solution
Device does not
On/off button switched off Switch on the on/off button.
light up
No electricity Connect the mains plug correctly.
No electricity The mains cable is defective. Contact
customer services or your retailer.
The fluorescent tube is not correctly inserted Insert the fluorescent tube correctly
(Chapter 8).
Fluorescent tube has reached the end of its
Replace the fluorescent tube
service life. Fluorescent tube is defective.
(Chapter 8).
12. Technical specifications
Dimensions (WHD) 340 x 480 x 80 mm
Weight 2.625 kg
Lighting elements 2 x 36 W tubes (2G 11), Daylight
Nominal data for replacement
Philips 2G 11, 36 W,
lighting elements
Osram/Dulux 2G 11, 36 W
Nominal data for starter AC 220 – 240 V, 4 to 65 W
Power 72 watts
Light intensity 10.000 lux (15 - 20 cm)
Radiation Output of radiation beyond the visible spectrum (infrared and UV) is
so low that it is harmless to eyes and skin.
Mains connection 230 V ~, 50 Hz
Degree of efficiency of the ballast ~ 80%
Source effiency (lm/W) of the bulb 67 lm/W
Color temperature of tubes 6.500 Kelvin
Subject to technical modifications.
14

