Beurer PM15: 10. Wake alarm mode

– age and gender.

If the heart rate limits have been entered directly, the display only switches between upper

and lower training limits.

•Iftheheartratealarmfunctionisswitchedoff,„---“and„oF“appearsinthedisplay.

•PresstheSTART/STOPbuttontoswitchtheheartratealarmfunctiononoroff.

With the pulse alarm activated, the following alarms are possible during heart rate measurement:

•heartrateiswithinthesettrainingzone: pulsemonitorbeepsonce.

•heartrateisabovethesettrainingzone: pulsemonitorbeepstwice,„H“andactualheartrate

reading flashing.

•heartrateisbelowthesettrainingzone: pulsemonitorbeepstwice,„L“andactualheartrate

reading flashing.

10. Wake alarm mode

•Youcanswitchthehourlysignalonandoffinwakealarmmodeusingtheresetbutton.

If the hourly signal is activated, the bell symbol appears in the display and a signal

sounds every full hour.

•Youcanswitchthewakealarmonandoffinwakealarmmodeusingthestart/stopbut-

ton. If the wake alarm is activated, a symbol appears and the alarm sounds at the given

time for 30 seconds. Press any button (except the light button) to stop the alarm.

28