Beurer MG 148: 8. Maintenance and storage Cleaning Storage 9. What if there are problems? 10. Technical specifications

If both handles are on the device, first remove the

Attach the belt extension as shown in the image.

handle on the side where the hook-and-loop fastener

is located.

8. Maintenance and storage

Cleaning

WARNING

•

Always unplug the mains part from the socket and disconnect it from the device before carrying out

any cleaning.

•

Clean the device using only the methods specified. Under no circumstances may liquid enter the

device or the accessory.

•

Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry

detergent where necessary. Do not use any solvent-based cleaning products.

•

Do not use the device again until it is completely dry.

Storage

If you do not plan to use the device for a long period of time, we recommend that you store it in the original

packing in a dry environment, ensuring it is not weighed down by additional items.

9. What if there are problems?

Problem Cause Solution

Massage heads rotating

The load on the massage

Free up massage heads.

too slowly.

heads is too great.

Massage heads do not

The device is not con-

Connect the mains adapter and switch on the

move.

nected to mains power

device.

supply.

Belt does not fit correctly. Belt length is too short. Attach the belt extension to the device.

10. Technical specifications

Device dimensions (W/H/D) ≈ 124 x 14 x 10 cm

Belt extension dimensions ≈ 39.5 x 7 x 0.5 cm

Weight ≈1230 g

Nominal power 12 W

Nominal voltage 100 – 240 V ~50/60 Hz

14