Hotpoint-Ariston AVTXF 149: Personalisations

Personalisations

Setting the spin cycle

GB

If, when the appliance is switched on, the KNOB is positioned on a

programme with a spin cycle, a fixed

appears. Press button

and the maximum spin speed allowed for the programme set will be

displayed, and the

the icon goes on. Press it again and the

values lower until they reach OFF, which indicates that the spin

cycle has been excluded (press it again to go back to the maximum

value); stop on the desired speed, after approximately 2 seconds

the setting is accepted: the symbol

remains fixed.

The spin cycle setting is enabled with all the programmes except for

11 (curtains, silk) and the Draining cycle.

Setting the temperature

If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature needs

to be regulated, a fixed

appears. Press button and the maximum temperature allowed for the programme

set will be displayed and the

icon flashes. Press it again and the temperature lowers until it reaches OFF,

which indicates a cold wash cycle (press it again to go back to the maximum value); stop on the desired value,

after approximately 2 seconds the setting is accepted: the symbol

remains fixed.

The temperature adjustment is enabled with all wash programmes.

Setting the Delay Timer

Press the button and you will see the word OFF on the display, while the relative symbol flashes.

Press the button again and "1h" appears, that is, a delay of one hour (this can reach up to 24h); stop on the

"desired" delay; after approximately 2 seconds the setting is accepted, following which, the time for the set

programme appears on the display and the symbol

remains on.

If you now press the START/RESET button, the set "delay" appears; this decreases every hour until the start of

the cycle. In this phase, the "delay" can only be modified by decreasing it.

The Delay Timer regulation is enabled with all programmes.

Keyboard lock (See page 17)

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the

programme set.

If you set a function that is incompatible with another function you selected previously, only the last one selected

will be enabled.

Function Effect Comments Enabled with

programmes:

S u p e r

Allows for an

This function is incompatible with the RAPID function.

1, 2, 3, 4,

Wa s h

impeccable

5, 6, 7, 8

wash, visibly

whiter than a

standard

Class A

wash.

E a s y i r o n This option

When this function is set, programmes 6, 7, 8, 11 and

All

reduces the

Delicate rinse will end with the laundry left to soak

programmes

amount of

(Anti-crease) and the Rinse cycle phase icon will

except for

creasing on

flash:

1, 2, 9, 10

fabrics,

- to conclude the cycle, press the START/RESET

and

making them

button;

Draining.

easier to

- to run the draining cycle alone, set the knob to

iron.

the relative symbol and press the START/RESET

button.

R a p i d Cuts the

This function is incompatible with the SUPER WASH

1, 2, 3, 4,

duration of

function.

5, 6, 7, 8

the wash

Rinses

cycle by 30%.

19