Beurer HK 45 Cosy: 3. Intended use 4. Operation 4.1 Safety 4.2 Initial use 4.3 Switching on 4.4 Setting the temperature WARNING

3. Intended use

CAUTION

This heating pad is only designed to warm up the human body.

4. Operation

4.1 Safety

CAUTION

The heating pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against

overheating across the entire surface of the heating pad with an automatic switch-off in the event of a

fault. If the SAFETY SYSTEM has switched off the heating pad, the temperature settings are no longer

illuminated when switched on. Please note that for safety reasons, the heating pad can no longer be

operated after a fault has occurred and must be sent to the specified service address.

4.2 Initial use

CAUTION

Ensure that the heating pad will not bunch up or become folded during use.

• First, connect the controller to the heating pad by inserting the plug-in coupling.

• Then plug the mains plug into the socket.

4.3 Switching on

To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3.

The temperature settings (4) are illuminated when switched on.

4.4 Setting the temperature

Level 0: OFF

Level 1: minimum heat

Level 2: medium heat

Level 3: maximum heat

NOTE:

• The fastest way to warm up the heating pad is to initially set the highest temperature setting.

NOTE:

These heating pads have a fast heating function, which allows the pad to warm up faster

in the first 10 minutes.

WARNING

If the heating pad is being used over several hours, we recommend

that you set the lowest temperature setting on the controller to avoid

overheating the heated body part, which may lead to burns to the skin.

12