Hotpoint-Ariston km 040 ax0: iten

iten

Do not use abrasive detergents or wire wool

examination, repair, or electrical

to clean the machine.

or mechanical adjustment.

Do not immerse the body of the machine in

• Do not leave the appliance unat-

water or any other liquid.

tended while it is running.

• Connect and operate the appliance only in ac-

USING THE APPLIANCE

cordance with the specications on the rating

plate.

Locking and releasing the motor head

• Read all instructions. Keep these instructions for

(A)

future use.

• To protect against risk of electrical shock, do not

To insert and remove any utensils and bowls, you will

immerse base, cord, or plug in water or other

needtoliftthemotorheadrst.Performthefollowing

liquid.

operations:

• If the power is interrupted, the appliance remains

1. Rotate the releasing lever anticlockwise

switched on and restarts when the power is re-

2. Use your other hand to gently lift the motor head

stored.

until it stops

• Avoidcontactingmovingpartsandkeepngers

3. Let go of the releasing lever and rotate it

out of discharge opening.

clockwise towards its starting position.

• To prevent injury, repairs such as replacing a

damaged cord should only be carried out by our

Having inserted the utensils, lower the motor head

customer service.

again. Perform the following operations:

• The use of attachments not recommended or

sold by the appliance manufacturer may cause

1. Rotate the releasing lever anticlockwise

re,electricshock,orinjury.

2. Use your other hand to gently rotate the motor

• Remove the bowl and any utensils from the

head downwards until it stops

appliance before washing them.

3. Let go of the releasing lever and rotate it

• Do not use outdoors.

clockwise towards its starting position.

• Do not let cord hang over edge of table or coun-

Never let go of either the motor head or lever

ter or touch hot surfaces.

until the operation is complete - both in the

• Do not operate this appliance in the presence of

lifting and lowering steps.

explosiveand/orammablefumes.

• This appliance is intended for household use

In the motor-head locking and releasing

only, not for commercial or industrial use. Use

steps, make sure your ngers do not get

for anything other than the intended purpose will

close to the articulated joint to avoid injuries.

void the warranty.

Never switch on the appliance with inserted

• To reduce the risk of electric shock, do not at-

utensils unless the bowl is properly in place.

tempt to remove the bottom cover. There are no

user serviceable parts inside. Repair should be

Fitting and removing the bowl (B)

done only by authorized personnel.

Fit the bowl through the following operations:

BEFORE FIRST USE

1. Make sure the appliance is off.

Beforetherstuse,washtheatbeater,doughhook

2. Unplug it.

and steel bowl using warm water and detergent.

3. Release and lift the motor head.

Rinse and dry thoroughly.

4. Place the bowl on the locking plate.

5. Slightly rotate the bowl clockwise until it locks in

Handwash the wire whisk.

place completely.

• Clean the outside of the machine with a soft

To remove it:

damp cloth, then wipe it dry.

• Placethemachineonadrysteadyatsurface

1. Make sure the appliance is off.

such as a counter or table. Keep it away from the

2. Unplug it.

edge of the work surface.

3. Release and lift the motor head.

11