Hotpoint-Ariston II DC60 AA0: iten

iten

       

In the version with no Optimal Soleplate Temperature

       

technology, follow the instructions below.

will disappear in a few minutes. When using the



1. Connect the plug of the iron to a grounded socket

steam jet on the garments because manufacturing

(220-240V). When the Compact Generator has

residues may be present in the steam dispenser.

been switched on, a buzzer will sound and the

FILLING THE WATER

temperature indicator will light up (8).

2. Use the temperature control (10) to select the

RESERVOIR

desired temperature. If you go from a lower

temperature to a higher temperature, the

Water plays an essential role both in the ironing

temperature indicator lights up to show that the

process and in the good operation of the iron in time.

Compact Generator is warming up.

In particular, a high concentration of limescale may

3. Once the Compact Generator has reached the

damage some parts of the Compact Generator and

set temperature, the temperature indicator light

cause its early deterioration.

goes off.

Water to be used

4. Make sure to check the garment label to

determine the fabric type. If in doubt, iron a hidden

We recommend using demineralised water.

part in order to determine the most appropriate

temperature and avoid damaging the fabric. In

Filling the water reservoir (A)

case of very delicate fabrics such as silk, wool

and synthetic materials, iron the garment inside

BeforellingthereservoiroftheCompactGenerator

out to prevent any shiny marks. Start with the

with water, make sure that the iron has been switched

garments that require a low temperature, e.g.

off and disconnected from the electrical socket.

synthetic fabrics.

1. Place the Compact Generator in a horizontal

Fabrics with this symbol on the label

must not be ironed.

position,openthelidofthellerhole(4)andll

the water reservoir using the water measurer

GARMENT

TEMPERATURE

supplied with the iron (6).

FABRIC TYPE

LABEL

INDICATION

2. Closethelidofthellinghole.

synthetic

MIN

     



silk

mixed cotton

other chemicals in the water reservoir - unless

recommended by Hotpoint-Ariston. Never use

wool

mixed wool

contaminated water.

cotton

USING THE COMPACT

linen

GENERATOR

jeans

MAX

Selecting the temperature (B)

If your Compact Generator is equipped with the

USING THE IRON

Optimal Soleplate Temperature technology, you don’t

needtoadjustthetemperatureand/orsteam.

Optimal Soleplate Temperature (C)

If your Compact Generator is equipped with the

1. Connect the plug of the iron to a grounded socket

Optimal Soleplate Temperature technology, you don’t

(220-240V). When the Compact Generator has

needtoadjustthetemperatureand/orsteam nor to

been switched on, a buzzer will sound and the

sort out the garments based on their fabrics. Just

temperature indicator will light up (8).

connect the plug of the iron to a grounded socket

2. You can iron all the fabrics that can be ironed in

(220-240V). As soon as the temperature indicator

any order.

light goes off, you can simply start ironing all the

fabrics that can be ironed in any order.

20