Beurer MC 3000: Installation location 5. Initial use Unpacking and assembly Step 1:
Installation location 5. Initial use Unpacking and assembly Step 1:: Beurer MC 3000
Table of contents
- Included in delivery 1. Intended use 2. Safety notes Electric shock
- Repairs Risk of fire Operation
- 3. Getting to know your device
- 4. Unit description Device parts Control element
- Installation location 5. Initial use Unpacking and assembly Step 1:
- Before switching on 6. Operation Flat position/upright position
- Starting the massage Switching off the massage chair
- 7. Maintenance and storage Folding mechanism
- 8. What if there are problems? 9. Technical Data 10. Disposal 11. Warranty and service
17
Warning!
Keep packaging material away from children!
•
Choking hazard.
Before using the device for the first time, read the
•
‘Safety notes’ section.
w
Safety notes, pages 12 and 13
Caution!
The massage chair could damage your flooring.
•
Place a suitable, non-slip underlay under the
massage chair.
Installation location
Install the massage chair on a sturdy and even
•
surface.
Before using the device for the first time, remove all
•
obstacles in front of and behind the massage chair
so that the back rest can be lowered and the leg
rest raised freely.
5. Initial use
The massage chair MC3000 is delivered in
a cardboard box.
Caution!
Do not use sharp or pointed tools (e.g. a Stanley knife)
to remove the packaging.
Unpacking and assembly
Step 1:
Open the cardboard box and hold the massage chair at the
>
designated holding points
Remove the chair from the cardboard box
>
Two people are required for this.
Carefully remove all the packaging material
>
Step 2:
Unfold the back rest to the upright position until the locking
>
mechanism audibly engages
The back rest now stands at approx. 115°.
Step 3:
Lay the back cushion on the massage chair over the back rest
>
Connect the back cushion and the back rest using the zip fastening
>
