Festool TPE-RS 100 Q: 9 Environment

TPE-RS 100 Q

11

GB

Firstly, join the two halves of the handle together. 



Put the thinner end 

[4-7]

 into the barrel with the

two-pointed prongs 

[4-1]

.



Push the nuts 

[4-3]

 through both large holes (Ø

9 mm/

[4-2]

) and screw them in with the SW 5

Allen key 

[4-6]

.



Now from the top of the barrel push on the ad-

ditional grips 

[4-5]

 and then the pad 

[4-4]

.



Now place the fastening segment 

[3-1]

 onto the

carpet remover gear housing 

[3-8]

.



Hang the wire clamps 

[3-7]

 to the right and left

on the hooks 

[3-9]

 next to the “ABWEISER” and

close the catches from behind 

[3-6]

.

Now connect the handle with the fastening seg-

ment. 



Put the ridges 

[3-2]

 into the grooves 

[3-3]

 on

the fastening segment.



Screw both sides together with the washer and

the Allen key screw SW 6 

[3-5]

.

Application

Depending on the size of the operator the additional

grips and the shoulder pad are placed on the han-

dle in such a way as to ensure optimum removal at

the best angle 

[1]

.

9 Environment

Do not throw the power tool in your household

waste! Dispose of machines, accessories and pack-

aging at an environmentally responsible recycling

centre. Observe the valid national regulations.

EU only: 

European Directive 2002/96/EC stipulates

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

Information on REACh:

www.festool.com/reach

10 EU Declaration of Conformity

We declare under sole responsibility that this prod-

uct complies with the following directives and stan-

dards:

2006/42/EC, 2004/108/EC, 2011/65/EU, EN 60 745-

1, EN 55014-1, EN 55014-2, EN 61000-3-2, EN

61000-3-3. 

Festool Group GmbH & Co. KG

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Martin Zimmer

Head of Research, Development and Technical

Documentation 

12.02.2013

Carpet remover

Serial no.

TPE-RS 100 Q

490039

Year of CE mark: 1999