Hotpoint-Ariston SI DC30 BA0: iten TROUBLESHOOTING

iten

TROUBLESHOOTING

Problem Possible cause / Solutions

The soleplate remains cold

• The plug may not be inserted into the electrical socket, or it may not

and does not warm up.

make contact.

• Check that the temperature is not set to MIN.

The temperature indicator

• The temperature indicator light turns on to indicate that the iron is

light turns on and off.

getting hot. The indicator light turns off when the set temperature is

reached.

Steam comes out in reduced

• The steam regulator is set to Off.

quantity or does not come

• Not enough water in the water reservoir. Fill the water reservoir.

out.

• Theironisnotsufcientlyhotand/ortheanti-dripfunctionisactive.

Replace the iron in vertical position, using the stand, and wait until

the temperature indicator light tuns off or the LCD becomes red

before starting to iron.

• The plate temperature may be too low due to the excessively frequent

activation of the shot of steam button. Slightly increase the interval

between steam shots.

Impurities come out from

• There may be residues in the vaporisation chamber. Make the

the soleplate and stain the

cleaning operations (see chapter “Cleaning and maintenance”,

garments.

section“Auto-CleanFunction”accordingtothemodel).

• You are using perfume, vinegar, starch, vinegar, starch, scale-

removing agents, ironing products or other chemical substances.

Remember that these substances may damage the product. Rinse

the water reservoir.

• .You are using starch. You can use starch directly on the inside out of

the fabrics and in any case never in the water reservoir.

• The garment was not washed correctly or has some soap residues.

• Youareironinganewgarmentthatwasnotwashedforthersttime.

Water is dripping out of the

• The soleplate temperature may be too low due to the excessively

soleplate

frequent activation of the shot of steam button. Slightly increase the

interval between steam shots.

• The soleplate temperature is set to a too-low temperature.

• You have replaced the iron horizontally without emptying it and/or

without setting the steam regulator to Off.

• Youdidnotclosethelidofthellerholecorrectly.

• You have used the shot of steam function with a too-low temperature.

We recommend to use these functions with temperatures higher than

.

• You are using perfume, vinegar, starch, vinegar, starch, scale-

removing agents, ironing products or other chemical substances.

Remember that these substances may damage the product. Rinse

the water reservoir.

29