Hotpoint-Ariston SI DC30 BA0: iten

iten

section“Selectingthetemperatureandadjusting

Automatic Stand-by

thesteam”).

LCD

function (H

)

1

Ironing with shot of steam (E

)

2

The automatic switch-off function guarantees total

The shot of steam function allows you to eliminate

safety.

persistent wrinkles. You can use this function both in

This function automatically switches off the iron when

no-steam and steam ironing mode.

it is not used for a few minutes. In particular:

1. Check that the water level in the reservoir is

• the iron switches off automatically after 30

higher than ¼.

seconds when left unattended in the ironing

2. Select the recommended ironing temperature

position or sideways;

with the temperature control (4b) (see step B

2

• the iron switches off automatically after 10

andchapter“Usingtheiron”,section“Selecting

minutes when left unattended in the rest position

thetemperatureandadjustingthesteam”).

(vertical).

3. Press the shot of steam button (1) to obtain

an extra steam ow when ironing. If the shot

Ifyouleavetheironunattended,thedisplayashesa

of steam function has not been used for some

green light and an acoustic signal is emitted to inform

time, it may be necessary to press the button

that the automatic stand-by function is active.

repeatedly to activate the pump.

Simply move the iron or press the temperature buttons

+/-(4a)toswitchitbackon.

FEATURES

Wait until the display becomes red before

Spray function (F)

starting ironing again.

The spray function is used to dampen the garment in

Automatic switch-off

order to remove persistent wrinkles easily. You can

function (H

)

use the spray function both in no-steam and steam

2

ironing mode at any temperature.

The automatic switch-off function guarantees total

1. Check that the water level in the reservoir is

safety.

higher than ¼.

This function automatically switches off the iron when

2. With the iron in horizontal position, press the

it is not used for a few minutes. In particular:

spraybutton(2)todampenthegarment.

• the iron switches off automatically after 30

Vertical steam function (G)

seconds when left unattended in the ironing

position or sideways;

The vertical steam function is useful to eliminate

• the iron switches off automatically after 10

wrinkles from hanging garments, curtains, etc. You

minutes when left unattended in the rest position

can use this function by simply placing the iron in

(vertical).

vertical position. All functions of the appliance will

remain unchanged also in this position (refer to

If you leave the iron unattended an acoustic signal is

chapter“Use”accordingtothemodel).

emitted to inform that the automatic switch-off function

Do not direct steam towards people or

is active.

animals and do not iron garments while

Simply move the iron to switch it back on.

worn.

Wait until the temperature indicator light

Anti-drip function

turns off before starting ironing again.

The iron is provided with anti-drip function in order to

CLEANING AND

automatically interrupt the steam distribution when the

temperature is too low, thus preventing water dripping

MAINTENANCE

out of the soleplate.

After use (I)

Do not use steam with low temperatures

1. Setthesteamregulator(3)toOff,disconnectthe

(see chart in step B

and B

, chapter “Using

1

2

appliance plug from the electrical socket and let

the iron”, according to the type of iron you are

the iron cool down.

using).

26