Nikon PD-10: LED Lamp Display

LED Lamp Display

The POWER, LINK and BUSY lamps (c3) indicate the following after the printer and camera are set up.

En

During printing standby, each lamp displays the color corresponding to the check mark (9).

Lamp Display Status Printing standby

POWER Lights Power is on 9

LINK Lights in yellow green Ready for wireless connection 9

Lights in orange Not ready for wireless connection

Blinks rapidly in orange for about 3 seconds There is a problem with the wireless connection.

BUSY Lights in yellow green Printing standby 9

Blinks in yellow green Transferring data for printing

Blinks rapidly in yellow green for about 3 sec-

There is a problem transferring data for printing.

onds

Blinks in orange Setting Profile Information on the camera

Lights in orange for about 3 seconds Profile Information setup on the camera complete

Blinks rapidly in orange for about 3 seconds There is a problem setting Profile Information on the camera.

Blinks alternately in orange and yellow green Resetting (c10)

Note

• If the connection with the camera is not established (when the BUSY lamp is not lit) and no operations are performed for about three minutes,

the PD-10 automatically turns off in order to reduce power consumption.

• If in printing standby (indicated by the check marks in the chart above) for 10 minutes, the PD-10 automatically turns off.

9