Hotpoint-Ariston TT 12E AR0: en OPERATION USING THE WARMING RACK

en

OPERATION

USING THE WARMING RACK

1. Put the food to be toasted into the bread slot.

The food that cannot be placed inside the slots

No more than two slices can be introduced

(e.g. rolls, baguettes, croissants) can be warmed

every time.

on the warming rack.

Make sure the crumb tray is perfectly in

1. Press the switch down until it engages. The

place before using.

warming rack can be extended.

2. Use the button to set the desired toasting

2. Plug the power cord into the outlet.

level.

3. Set the toasting level to the desired colour

3. Pull down the operating lever until it engag-

using the toasting level button. The lowest

es.

level is 1 and the highest level is 8. The de-

fault level is 4.

Never place aluminium foil on the warm-

ing rack. Pull up the rack control handle

If you toast only one slice, set the toast-

to reposition the rack when not in use.

ing level lower than for two slices. If you

Never warm and toast at the same time!

toast the food continuously, the toasting col-

our of the different slices can be slightly dif-

CAUTION

ferent or darker, even if the same level is used.

4. Pull down the operating lever until it en-

1. If the toaster starts to smoke, press the CAN-

gages: toasting will begin at once. Once the

CEL button to stop toasting immediately.

bread has been toasted to the preset level,

2. Remove any protective wrapping before po-

the operating lever will automatically spring

sitioning the toaster.

up.

3. Avoid toasting food with extremely runny in-

gredients such as butter.

The operating lever can rest on the bot-

4. Be careful not to damage the internal mech-

tom of the slot only if the plug was con-

anism or heating elements when removing

nected.

the bread.

5. During the toasting process, you may want

Toast any items only until they are gold-

to observe the toasting colour. If it is satis-

en brown and not brown or too dark. Re-

fying, press the CANCEL button to stop the

move any burnt edges. Do not over-toast food

operation at any time.

containing starch - especially grain and potato

6. If the bread was taken out of the FREEZER,

products - to reduce the production of acryl

set the toasting level according to your pref-

amides. If a slice gets stuck at the end of the

toasting process, pull the power plug and

erence. Pull down the operating lever until it

carefully remove the bread after the toaster

is in place, then press the DEFROST button

has cooled down.

to toast it to your desired colour.

7. If you want to reheat any cold toasted bread,

press the REHEAT button. Toasting time is

CLEANING AND MAINTENANCE

xed in this mode: when time is over the op-

erating lever will automatically spring up and

1. Disconnect from the AC outlet before clean-

stop the reheating process.

ing.

2. Wipe the outside with a soft dry cloth after

the toaster has cooled down. Never use

metal polish.

3. Pull out the crumb tray from the bottom of

the toaster and empty it. If the toaster is

hotpoint.eu

9