Vitek VT-4060 SR: Troubleshooting Symptom Cause Solution Specification DVD receiver

ENGLISH

Troubleshooting

Before resorting to maintenance service, please kindly check by yourself with the following chart.

Trouble shooting

Symptom Cause Solution

No power The power cord isn’t connected Connect the cord to player

Fuse melting Replace the cord with the same one

TV receiver setup is not correct Change TV receiver setup

No picture Video setup is not correct Change video setup

Video cable isn’t connected well Connect the cable properly

Distorted picture Dirty disc Clean the disc

In fast forward or fast rewind mode Sometimes, tiny distortion appears normally

Luminance unsteady

Anticopy circuit influence Connect the DVD unit to TV directly

or picture with noise

Unable to play Without disc Load the disc

Disc is damaged Clean or replace the disc

Disc is put upside down Load the disc properly

Dirty disc Clean the disc

There are menu on TV screen Use SETUP to turn off menu

Parental control is working Set up parental off or change the setup

Key malfunction Power wave or other static interference Turn on/off the power and try again.

Remote control doesn’t work Remote control is not directed properly Point the remote control at the sensor

Remote control is too far from DVD unit Come inside the remote control operation space

Batteries are weak Replace the batteries

No radio signal Antenna is not connected Connect antenna

Signal source is chosen improperly Switch source signal to tuner mode

Specification

DVD receiver

Power supply AC ~230V/50Hz

Power consumption 175W

Working environment Temperature 10°С - +40°С

Relative humidity 5%90%

Disc output TV System PAL, NTSC

Frequency response 20 Hz - 20kHz

S/N(A weight) > 80 dB (1 kHz)

THD+NOISE < 60 dB (1 kHz)

WOW FLUTTER Below the limit of apparatus measure

Tuner AM frequency Range 522 kHz – 1620 kHz

FM frequency Range 64 MHz – 108 MHz

Power output (Max) 25 W*5 + 50 W

Frequency response instability ±1.5 dB

The manufacturer reserves the right to make changes to the characteristics of the device without prior notice.

The service life of the device is no less than five years.

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be

produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive

89/336/EEC and to the Low Voltage Regulation (23/73 EEC)

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four

figures indicating the production date. For example, serial number 0606ххххххх means that the item was manufactured in June (the sixth month)

2006.

12

4060.indd 124060.indd 12 23.10.2006 9:25:1423.10.2006 9:25:14