Hotpoint-Ariston SI E40 BA0: iten

iten

2. Emptythewaterreservoir(9).

made of resistant material, press the Auto-Clean

3. Windthecordaroundthecablewinder(6)and

button(8)andshakegently.

store the iron in vertical position, in a dry safe

Steam and boiling water will come out of the

place.

soleplate with scale residues and other

Never store the iron in horizontal position.

impurities. Never use plastic containers for

Always use the stand at the back of the iron.

collection.

Cleaning (J)

7. Switch off the iron and disconnect it from the

electrical socket.

Never use aggressive and/or abrasive

8. Set the steam select to the maximum position.

substances to clean the plastic parts and

9. Allow water to come out of the holes for at least

the iron soleplate.

30 minutes.

1. Setthesteamregulator(3)toOff,disconnectthe

10. Slide the iron gently on a cloth to eliminate any

appliance plug from the electrical socket and let

stains from the soleplate.

the iron cool down.

11. Before using the iron again, press the shot of

2. Use a dry or slightly dampened soft cloth to

steam button (1) repeatedly to eliminate any

clean the upper part of the iron.

scale residues.

3. For the ordinary cleaning and/or removal of

When making this operation, keep the iron

stains or other residues deposited on the plate,

away from the garments in order not to

clean with a dampened soft cloth and dry.

stain them.

4. Use a dampened cotton tip to eliminate scale in

the steam holes that may impair the performance

Auto-Clean Function (K

)

2

of your iron.

If you have been using water from the tap, we

In order to keep the soleplate perfectly

recommend starting the Auto-Clean function after

smooth and polished, avoid contacts with

ironing.

metal objects, do not iron sharp objects, such as

buttons, studs and hinges in order to avoid

The use of the Auto-Clean function should

scratching the plate.

not be deemed the same as using deminera-

lised water on a regular basis.

5. Regularly rinse the reservoir with clean water.

After cleaning, always empty the water reservoir.

1. Check that the appliance is disconnected from

LCD

the electrical socket and the steam regulator is

Auto-Clean Function (K

)

1

(3)settoOff.

If you have been using water from the tap, we

2. Fill the water reservoir (9) up to the maximum

recommend starting the Auto-Clean function after

waterlevel(10).

ironing.

3. Connect the plug of the appliance into a

groundedsocket(220-240V).

The use of the Auto-Clean function should

4. Set the temperature to the maximum value with

not be deemed the same as using deminera-

thetemperaturecontrol(4b).

lised water on a regular basis.

5. Wait at least 2 or 3 minutes to warm the iron

1. Check that the appliance is disconnected from

completely.

the electrical socket and the steam regulator is

6. Holding the iron above the sink or a container

(3)settoOff.

made of resistant material, press the Auto-Clean

2. Fill the water reservoir (9) up to the maximum

button(8)andshakegently.

waterlevel(10).

Steam and boiling water will come out of the

3. Connect the plug of the appliance into a

soleplate with scale residues and other

groundedsocket(220-240V).

impurities. Never use plastic containers for

4. Set the temperature to the maximum value with

collection.

thetemperaturebuttons+/-(4a).

5. Wait at least 2 or 3 minutes to warm the iron

7. Switch off the iron and disconnect it from the

completely.

electrical socket.

6. Holding the iron above the sink or a container

8. Set the steam select to the maximum position.

27