HEIDENHAIN PWM 20: 3 Mounting

PWM 20

Operating Instructions

en

21

2.6 Safety precautions for operation with and in machines. WARNING

Danger of considerable personal injury or damage to

property resulting from improper use.

Improper operation of the NC, incorrect NC

programming, or incorrect or non-optimized machine

parameter values can lead to faulty machine

performance.

In order to be able to judge the malfunction of an NC-

controlled machine, you need to have fundamental

knowledge about the machine, drives, inverters and

NCs, as well as their interaction with the encoders.

Apart from the information in these Instructions, the

specific instructions for safety and the prevention of

accidents when handling the respective machines,

drives, inverters, and NCs must therefore be

observed!

When the device is installed in a machine or used

in other special applications, all safety precautions

detailed in these Instructions must be adapted to the

respective conditions of use!

In particular, the required adjustments to changed

grounding situations during installation and

connection of the device to the control loop of an NC-

controlled machine must be adhered to.

The machine manufacturer must be contacted for

error diagnosis.

3 Mounting

3.1 Items supplied

The following items are included in the standard items

supplied:

Product

3 m long power cable with European plug

Operating Instructions

2 m long USB connecting cable

CD with ATS software

Addendum (optional—for more information, see "Notes

on reading the documentation", page 18)

The device can optionally be delivered as a

part of an encoder diagnostics kit. Additional

items will then be included in delivery. For more

information, see the operation instructions for

the ATS software.

Unpacking

Open the top lid of the box.

Remove the packaging materials.

Unpack the contents.

Check the delivery for completeness.

Check the delivery for damage.

If any components were damaged in transit,

keep the packaging materials for inspection and

contact your HEIDENHAIN distributor or OEM.

This applies also if you need replacement parts.

In case of damage in transit

Have the shipping agent confirm the damage.

Keep the packaging materials for inspection.

Notify the sender of the damage.

If necessary, contact your distributor for mediation.

Contact your HEIDENHAIN distributor or OEM for

replacement parts.

Accessories

An overview of optional items that can be ordered from

HEIDENHAIN for this product is contained in the operating

instructions for the ATS software.