Vitek VT-3539: TEMPERATURE ALARM SETTINGS High temperature alarm Low temperature alarm When the alarm will be heard
TEMPERATURE ALARM SETTINGS High temperature alarm Low temperature alarm When the alarm will be heard: Vitek VT-3539
Table of contents
- WEATHER STATION USER INSTRUCTIONS Features: Block with main display:
- Remote sensors: OPERATING CONTROLS
- READ BEFORE USING For best results: GETTING STARTED Step 1: Setting up the remote sensor:
- Step 2: Receiver settings SYNCHRONIZING THE OUTDOOR TEMPERATURE READING Auto-detect function: Manual learning function (Search for remote sensor signals):
- SETTING THE TIME AND ALARM Setting the time:
- WEATHER CONDITIONS DISPLAY
- Hi and Lo symbols on the display Temperature trend indicator The temperature trend indicator shows the temperature trend registered by a separate sensor over the past half-hour. TEMPERATURE CONDITIONS REPORT Temperature conditions reporting symbols Black ice warning
- TEMPERATURE ALARM SETTINGS High temperature alarm Low temperature alarm When the alarm will be heard
- BACKLIGHT USING AN EXTERNAL WIRED SENSOR LOW BATTERY INDICATOR Receiver:
- Remote sensor:
- RESOLVING MALFUNCTIONS Problem Resolution
- TECHNICAL CHARACTERISTICS Meteorological station receiver Meteorological station remote sensor MINIMUM SERVICE LIFE - 3 YEARS
ENGLISH
• If there is not humidity data available for channel 1, cloudy weather will always be
indicated, although snow and black ice warnings will continue to be displayed.
TEMPERATURE ALARM SETTINGS
The temperature alarm function allows you to program the audible alarms if the tem-
perature becomes higher or lower than a preset setting.
High temperature alarm
1 Use the Mode/Snooze button to choose
the High temperature mode, the
symbol
will appear on the display.
2 Use the Channel button to choose the
channel (indoor, channel 1, channel 2, chan-
nel 3 or channel 4)
3 Press the Hour/+/Max or Minute/-/Min
buttons to set the desired temperature.
4 Press the Mode/Snooze button to save
the settings.
Low temperature alarm
1 Use the Mode/Snooze button to choose
the Low temperature mode, the symbol
will appear on the display.
2 Use the Channel button to choose the
channel (indoor, channel 1, channel 2, chan-
nel 3 or channel 4)
3 Press the Hour/+/Max or Minute/-/Min
buttons to set the desired temperature.
4 Press the Mode/Snooze button to save
the settings.
When the alarm will be heard
• When a low temperature or high temperature signal is detected on the pre-deter-
mined channel, the display will show the or symbol.
• When the alarm is activated, the display will show the channel giving the alarm and
the or symbol will blink (depending upon the type of alarm – low or high tem-
perature). Press ANY button to deactivate the alarm.
9
35391.indd 935391.indd 9 23.05.2006 17:08:5223.05.2006 17:08:52
