Vitek VT-3539: Hi and Lo symbols on the display Temperature trend indicator The temperature trend indicator shows the temperature trend registered by a separate sensor over the past half-hour. TEMPERATURE CONDITIONS REPORT Temperature conditions reporting symbols Black ice warning
Hi and Lo symbols on the display Temperature trend indicator The temperature trend indicator shows the temperature trend registered by a separate sensor over the past half-hour. TEMPERATURE CONDITIONS REPORT Temperature conditions reporting symbols Black ice warning: Vitek VT-3539
Table of contents
- WEATHER STATION USER INSTRUCTIONS Features: Block with main display:
- Remote sensors: OPERATING CONTROLS
- READ BEFORE USING For best results: GETTING STARTED Step 1: Setting up the remote sensor:
- Step 2: Receiver settings SYNCHRONIZING THE OUTDOOR TEMPERATURE READING Auto-detect function: Manual learning function (Search for remote sensor signals):
- SETTING THE TIME AND ALARM Setting the time:
- WEATHER CONDITIONS DISPLAY
- Hi and Lo symbols on the display Temperature trend indicator The temperature trend indicator shows the temperature trend registered by a separate sensor over the past half-hour. TEMPERATURE CONDITIONS REPORT Temperature conditions reporting symbols Black ice warning
- TEMPERATURE ALARM SETTINGS High temperature alarm Low temperature alarm When the alarm will be heard
- BACKLIGHT USING AN EXTERNAL WIRED SENSOR LOW BATTERY INDICATOR Receiver:
- Remote sensor:
- RESOLVING MALFUNCTIONS Problem Resolution
- TECHNICAL CHARACTERISTICS Meteorological station receiver Meteorological station remote sensor MINIMUM SERVICE LIFE - 3 YEARS
ENGLISH
Note: The minimum and maximum temperature data is erased daily (at midnight).
Hi and Lo symbols on the display
The Hi and Lo symbols appear on the display if the temperature or humidity level is
without the measurement boundaries of the device.
Indoor/ Outdoor Temperature Humidity Reading on LCD
Indoor > + 55°C - Hi
Indoor < - 20°C - Lo
Outdoor > + 70°C > 95% Hi
Outdoor < - 30°C < 15% Lo
Temperature trend indicator
The temperature trend indicator shows the temperature trend registered by a separate
sensor over the past half-hour.
Pointer
Trend Rising Stable Falling
TEMPERATURE CONDITIONS REPORT
Temperature conditions reporting symbols
The receiver’s display will show the following symbols, representing the weather condi-
tions (they are chosen based on the temperature and humidity data received from the
remote sensor (channel 1)):
Sunny Cloudy Rain Snow Black Ice
Weather
conditions
indicator
Black ice warning
• Displayed as a blinking snow symbol.
• Is displayed when the temperature on channel one is between -1.9°C and +2.9°C.
• Snow hardens and changes into ice when the temperature on channel 1 becomes
less that -1.9 °C. This is the freezing temperature.
• Cloudy weather will be indicated when the device is first connected..
• The sensor on channel 1 is used for weather information.
• If there is no sensor connected to channel 1, cloudy weather will always be indi-
cated
8
35391.indd 835391.indd 8 23.05.2006 17:08:5223.05.2006 17:08:52
