Philips Super Parquet Nozzle FC8042: instruction

Super Parquet Nozzle

FC8042

2

ENGLISH  4 DEUTSCH  5 FRAN Ç AIS  6 NEDERLANDS  7 ESPAÑOL  8 ITALIANO  9 PORTUGUÊS  10 NORSK  11 SVENSKA  12 SUOMI  13 DANSK  14   15 TÜRKÇE  16 POLSKI  17 ROMÂNĂ  18 РУССКИЙ  19 ČESKY  20 MAGYAR  21 SLOVENSKY  22 УКРАЇНСЬКА  23 HRVATSKI  24 EESTI  25 LATVISKI  26 LIETUVIŠKAI  27 SLOVENŠČINA  28 БЪЛГАРСКИ  29 SRPSKI  30   31

TI”NG VI◊T 

32 33 34 35 36

FC8042 

Super Parquet nozzle

This nozzle enables you to clean and polish your hard floor. It removes

3 times more dirt.

Never use water to clean wooden floors or parquet.

To clean the Super Parquet nozzle:

1

You can remove the pads by pulling them off the discs (the pads

are fastened to the discs by means of Velcro).

2

You can clean the pads by removing the Super Parquet nozzle

from the appliance and vacuum cleaning the pads while still

attached to the nozzle. Select the lowest suction power setting.

◗

You can also clean the pads in warm water (with some soap).

◗

The pads can even be washed in the washing machine.

Wash the pads seperately.

( & * ^

Never use chloride or fabric softener to clean the pads.

Make sure the pads are clean and dry before you use them again.

3

Reattach the red sides of the clean pads to the discs.

The light blue sides of the pads need to be in contact with the floor, not

the red sides!

Replace the pads at least every three months.

New pads are available from your local Philips dealer (type HR8041).

ENGLISH

4