Hotpoint-Ariston HB 0705 AB0: iten

iten

exceed the max capacity of the cup.

USING THE FOOD

3. Plug the appliance into the power outlet.

PROCESSOR ATTACHMENT (D)

4. Lower the hand blender into the food and rotate

the speed-adjusting dial to select the desired

To use the chopping bowl (only on some models):

speed. Pressing and holding the ON/OFF

button, the blender starts blending immediately.

1. First of all make sure the non-slip ring is xed to

For maximum-speed blending use the TURBO

the bottom of the bowl.

button for a short time.

2. Fit the knife blade on the pin in the bowl - always

t the knife blade before adding the ingredients.

USE THE WHISK ATTACHMENT (only

3. Cut the food into small pieces and put them into

on some models) (B)

the bowl.

The whisk attachment is mainly suitable for whisking

       

egg whites.

smooth running of the appliance.

1. To assemble the whisk attachment to the motor

4. Align the two fasteners of the bowl lid with the

unit, turn the stem clockwise until tightened.

two clip positions of the bowl and push down to

2. Place the food into the beaker.

lock them in place. Be sure to align the arrow on

3. Plug the appliance into the power outlet.

the lid and the arrow on the bowl.

4. Lower the whisk into the food and rotate the

speed-adjusting dial to select the desired speed.



Pressing and holding the ON/OFF button, the

    

attachment starts whisking immediately. For



maximum-speed whisking use the TURBO

button for a short time.



into its housing on the cover.

USE THE SMALL BOWL FOR FINE

CHOPPING (only on some models) (C)

5. Assemble the motor unit into the bowl lid and

turn it clockwise to lock them.

1. First of all make sure the non-slip ring is xed to

6. Plug the appliance into the power outlet.

the bottom of the bowl.

7. Rotate the speed-adjusting dial to select the

2. Fit the knife blade on the pin in the bowl - always

desired speed. Pressing and holding the ON/

t the knife blade before adding the ingredients.

OFF button, the attachment starts chopping

3. Cut the food into small pieces and put them into

immediately. For maximum speed press the

the bowl.

TURBO button for a short time.

8. Remove the knife blade rst before pouring out

       

the mixture.

smooth running of the appliance.

    

Never introduce very hard foods (e.g. hard

discs for processing (only on some



models) (E).



1. First of all make sure the non-slip base is xed to

the bottom of the bowl.

4. Close with the lid.

2. Then insert the disc shaft into the pin on the

5. Assemble the motor unit into the bowl lid and

bottom of the bowl, select the desired shredding/

turn it clockwise to lock them.

slicing disc (ne or coarse) and assemble

6. Plug the appliance into the power outlet.

the shredding /slicing disc onto the shaft with

7. Rotate the speed-adjusting dial to select the

the appropriate side upwards (one side is for

desired speed. Pressing and holding the ON/

shredding, the other side is for slicing).

OFF button, the attachment starts chopping

immediately. For maximum speed press the

     

TURBO button for a short time.

handling discs as they are very sharp.

8. Remove the knife blade rst before pouring out

the mixture.

14