Acme BH03: Overview

GB

Overview

The headset contains the following parts as shown

6

in the gure:

(1) Answer/end key.

(2) Led Indicator (red/blue)

(3) Microphone

(4) Earphone

(5) Charger socket

(6) Volume up (+) and volume down (-) buttons

Before you can start using the headset, you must

charge the battery and pair the headset with a

compatible phone.

Note: Parts of the headset are magnetic. Metallic materials may be attracted to the

headset. Do not place credit cards or other magnetic storage media near the headset,

because information stored on them may be erased.

Charge the battery

This device has an internal, rechargeable battery. It connects the charger cable to the

headset.

1. Connect the charger to a wall outlet. The red indicator light is displayed during

charging. If charging does not start, disconnect the charger, plug it again, and retry.

Charging the battery fully may take up to 2 hours.

2. When the battery is fully charged, the red indicator light will turn o. Disconnect the

charger from the wall outlet and the headset.

The fully charged battery has power for up to 4 hours of talk-time or up to 60 hours of

standby time. However, the talk and standby times may vary when used with dierent

mobile phones, products that use a Bluetooth connection, usage settings, usage styles,

and environments.

When the battery is running out of power, the red indicator light starts to ash.

Switch the headset on or o

To switch on, press and hold the Answer/end key for 4 seconds. The blue indicator light

starts to ash.

To switch o, press and hold the power key for 4 seconds until the red indicator light is

displayed briey.

2 3