Hotpoint-Ariston ARSF 85: Care and maintenance

Care and maintenance

Cutting off the water and electricity

Cleaning the pump

GB

supplies

The washing machine is fitted with a self-cleaning

 Turn off the water tap after every wash cycle. This

pump which does not require any maintenance.

will limit wear on the hydraulic system inside the

Sometimes, small items (such as coins or buttons)

washing machine and help to prevent leaks.

may fall into the pre-chamber which protects the

pump, situated in its bottom part.

 Unplug the washing machine when cleaning it and

during all maintenance work.

 Make sure the wash cycle has finished and unplug

the appliance.

Cleaning the washing machine

To access the pre-chamber:

The outer parts and rubber components of the

appliance can be cleaned using a soft cloth soaked

1. using a screwdriver,

in lukewarm soapy water. Do not use solvents or

remove the cover panel

abrasives.

on the lower front part of

the washing machine

(see figure);

Cleaning the detergent dispenser

drawer

Remove the dispenser

1

by raising it and pulling it

out (see figure).

Wash it under running

2. unscrew the lid by

water; this operation

rotating it anti-clockwise

should be repeated

(see figure): a little water

frequently.

may trickle out. This is

perfectly normal;

2

Caring for the door and drum of your

appliance

 Always leave the porthole door ajar in order to

3. clean the inside thoroughly;

prevent unpleasant odours from forming.

4. screw the lid back on;

5. reposition the panel, making sure the hooks are

securely in place before you push it onto the

appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If there are

any cracks, it should be replaced immediately: during

the wash cycles, water pressure is very strong and a

cracked hose could easily split open.

 Never use second-hand hoses.

10