Vitek VT-1693: Setting up Protective coating Glass tray installation Operation Assembling microwave oven

ENGLISH

a way as to prevent people from walking

out of the operating chamber of the oven.

over it.

Examine the oven in order to detect any

damages if any. Pay special attention to

Setting up

the door, make sure it is functioning prop-

• Make sure the operating voltage of the

erly. Do not install and switch on the oven in

power supply line meets the voltage

case there are any damages.

marked on the housing of the appliance.

• Make sure that all elements of packing

Protective coating

are removed from the operating chamber

Housing: Remove protective film from the

of the oven.

surface of the housing if any.

• Do not remove light-gray mica plate from

Do not remove light-gray mica plate lo-

inside of the operating chamber, located

cated inside the housing, at the place

at the place of microwave radiation out-

of microwaves output (4), it serves as

put (4). It serves as magnetron protec-

magnetron protection.

tion.

Attention! Make sure there are not any

Glass tray installation

damages, such as the following: door is

1. Insert the support of glass tray (6) into

bent or broken, fastening or latch joints

the opening on the bottom of the oper-

are broken or loose, there are dents in-

ating chamber.

side the oven or on the door. It is forbid-

2. Install the rolling ring (7) on the bottom

den using the microwave oven in case of

of the operating chamber.

any damage.

3. Carefully install glass tray (3) on the roll-

• Install the microwave oven on a firm flat

ing ring (7) uniting its lugs with the slots

surface, able to bear its weight and maxi-

of the support (6).

mum weight of foodstuff to be prepared.

The place for installation should be not

• Never install glass tray upside down.

accessible by small children.

• Do not interfere with free rotation of the

• Do not install the oven at any places with

glass tray during microwave oven opera-

excessive humidity or temperature, and

tion.

also near highly inflammable objects.

• Always use glass tray and rolling ring for

• Good ventilation is essential for normal

cooking any foodstuff.

operation of this appliance. Provide free

• Place cookware on the glass tray only.

space: 30 cm above the oven and 7-8 cm

• Glass tray could rotate clockwise or anti-

behind and at both sides. Do not cover

clockwise. It is normal.

or block any openings on the appliance

• If any cracks or cleavages on the glass

housing. Do not detach small legs on the

tray, stop using the oven immediately

bottom of the oven.

and replace the tray.

• It is forbidden using the oven in case the

glass tray and rolling ring is absent.

Operation

• Make sure power cable is not damaged

• Before switching on, make sure the oper-

and does not run under the oven or on

ating voltage of power supply line meets

any hot surfaces or over any sharp ob-

the voltage marked on the housing of the

jects.

appliance.

• Put foodstuff into the operating chamber

Assembling microwave oven

and close the door.

Remove packing material and accessories

7

1693.indd 71693.indd 7 12.03.2008 17:33:2112.03.2008 17:33:21