Zelmer 28Z020 – страница 5

How to ll the water

Disconnect the iron from mains supply outlet. –

Spraying

Move the – Steam Control Knob (7)

This function can be used any time –

to position.

and is not affect any setting.

Release the – water inlet cover (5)

Fill the water tank as described in –

and ll water through the water inlet

How to Fill Water.

hole.

Aim the – nozzle (6) to the garment.

Fill up to the „ – MAX” level marked on

Press the – Spray Button (10).

the side of water tank.

It may be necessary to press the spray button a few times to start this –

Close the – water inlet cover (5).

function.

Note:

Dry ironing – Always follow the garment manufacturer’s ironing

For best result, it is advisable to use demineralised water or distilled

instructions mentioned at the garment label.

water. Do not use chemically descaled water or any other liquids.

Unwind and straighten the – power cord (13).

Preparation for operation – rst ironing

Move the – Steam Control Knob (7) to position.

Remove any protective lms or sticker from the – soleplate (1) and the

Connect the iron to a suitable mains supply outlet. –

cabinet, if any.

Turn the – Temperature Dial (2) in clockwise direction to; set ●, ●● or

Unwind and straighten the – power cord (13).

●●● position.

Fill the iron as described in “How to ll water”. –

Control light (11) – glows, indicating that the iron is on.

Connect the iron to a suitable mains supply outlet. –

Control light goes off when the required temperature is reached. The –

Turn the – Temperature Dial (2) in clockwise direction to ●●● position

iron is now ready for use.

– control light (11) glows.

Move the – Temperature Dial (2) in anti-clockwise direction to „MIN”;

Control light goes off when the required temperature is reached. –

the iron is switched off.

Move the – Steam Control Knob (7) to position.

Disconnect the iron from mains supply outlet. –

Steam starts coming out from the holes in the sole plate after putting –

When the iron gets cool completely, store it vertically in a safe place. –

the iron in horizontal position and after pressing the Burst of Steam

Steam ironing – Always follow the garment manufacturer’s

Button (9).

ironing instructions mentioned at the garment label.

Begin rst time ironing with an old towel. –

The steam is not generated after the water tank is emptied. –

Unwind and straighten the – power cord (13).

The preparation work is completed. The iron is now ready for proper use. –

Fill the iron as described in “How to ll water”. –

Connect the iron to a suitable mains supply –

After operation

outlet.

Move the – Temperature Dial (2) in anti-clockwise direction to „MIN”;

Turn the – Temperature Dial (2) in clockwise

the iron is switched off.

direction to ●●● position. (For optimum steam

Move the – Steam Control Knob (7) to position.

quality, do not use ● or ●● setting for steam

Disconnect the iron from mains supply outlet. –

ironing).

When the iron gets cool completely, store it vertically in a safe place. –

Control light (11) – glows, indicating that the iron is on.

Control light goes off when the required temperature is reached. The –

ATTENTION:

iron is now ready for use.

It may be necessary to press the burst of steam button a few times

Move the – Steam Control Knob (7) to selected position, in order to set

to start this function.

the amount of steam.

For optimum steam quality, do not operate the Burst Of Steam more

After nishing move the – Temperature Dial (2) in anti-clockwise

than three times after the pilot light goes off.

direction to „MIN”; the iron is switched off.

Move the – Steam Control Knob (7) to position.

Burst of steam in vertical position – Always follow the garment

Disconnect the iron from mains supply outlet. –

manufacturer’s ironing instructions mentioned at the garment label.

When the iron gets cool completely, store it vertically in a safe place. –

This function provides extra amount of steam to remove wrinkles

on delicate garments in hanging position, hanging curtains, or

Burst of steam – Always follow the garment manufacturer’s

other hanging fabrics.

ironing instructions mentioned at the garment label.

Warning:

This function provides extra amount of steam which can be used for

Do not apply steam on any clothes or fabrics that are being worn by

ironing very wrinkled (crumpled) clothes.

human or pets. Temperature of steam is very high. Never direct the

Unwind and straighten the – power cord (13).

steam to human or pets.

Fill the water tank in as described under “How To Fill Water”. –

Fill the water tank in as described under “How To Fill Water”. –

Connect the iron to a suitable mains supply outlet. –

Connect the iron to a suitable mains supply outlet. –

Turn the – Temperature Dial (2) in clockwise

Turn the – Temperature Dial (2) to ●●●

direction to ●●● position. See preparation for

position. See „Preparation for operation“.

operation.

Control light (11) – glows, indicating that

Control light (11) – glows, indicating that the

the iron is on.

iron is on.

Control light goes off when the required –

Control light goes off when the required –

temperature is reached. The iron is now

temperature is reached. The iron is now

ready for use.

ready for use.

Hold the iron between 15 and 30 –

Press the – Burst of Steam Button (9) once

centimetres away from the garment.

– steam will shoot from the holes of the

Press the – Burst of Steam Button (9) once – steam will shoot from the

soleplate.

holes of the soleplate.

For stubborn wrinkles, wait a few seconds before pressing the Burst of –

For stubborn wrinkles, wait a few seconds before pressing the – Burst

Steam Button (9) again. Most wrinkles can be removed within three

of Steam Button (9) again. Most wrinkles can be removed within

presses.

three presses.

After nishing move the – Temperature Dial (2) in anti-clockwise

After operation turn the – temperature dial knob (2) in counter clockwise

direction to „MIN”; the iron is switched off.

direction to „MIN” position. The iron is switched off.

Move the – Steam Control Knob (7) to position.

Lock the iron with stand as described in “How to Use Iron Lock”. –

Disconnect the iron from mains supply outlet. –

Move the – Steam Control Knob (7) to position.

When the iron gets cool completely, store it vertically in a safe place. –

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

It may be necessary to press the burst of steam button a few times

Gently move the iron back and forth until the water tank is empty. –

to start this function.

When Self-Cleaning is complete, release the Self-Cleaning Knob. –

For optimum steam quality, do not operate the Burst Of Steam more

Rest your iron at the stand and allow to fully cool down. –

than three times after the pilot light goes off.

Wipe the soleplate with a cold damp cloth. –

Hold the iron some centimetres away from delicate garments (arti-

Caution!

cial, silk, velvet etc.), otherwise they can be damaged.

Keep skin/body away from the hot water.

Build-in anti-scale system

(concerning irons type 28Z020, 28Z021, 28Z022)

Anti-Drip System

The build-in anti-scale cartridge is designed to reduce the build-up of lime

The system, which is designed to prevent –

scale that occurs during steam ironing. This will prolong the working life of

automatically water escaping from the

your iron, although it does not stop the natural process of build-up of lime

sole-plate when the iron is too cold.

scale completely.

During use, the anti-drip system may –

emit a loud clicking sound, particularly

during heat-up or whilst cooling down.

Self-cleaning

This is per-fectly normal and indicates

This function removes the scales and minerals built up in the Steam

that the system is functioning correctly.

Chamber.

The iron will remain in the best condition if this function is performed at

Auto shut-off feature

least once a month or more regularly depending on the hardness of the

(Concerning iron 28Z021, 28Z022)

water used.

The Auto shut-off feature will operate automatically when the iron is un-

Fill the iron as described in “How to ll water”. –

attended and it is connected to a mains supply outlet.

Connect the iron to a suitable mains supply outlet. See „Preparation –

AUTO SHUT-OFF IN HORIZONTAL POSITION

for operation”.

1. The iron will switch off automatically after approximately 30 seconds,

Turn the – Temperature Dial (2) in clockwise direction to „MAX“ position.

if it is immobile in the ironing position (horizontal).

Control light (11) – glows, indicating that the iron is on.

2. You can hear a sound signal. The auto switch-off pilot light (4), shall

Control light goes off when the required temperature is reached. –

ash indicating that the iron changed to auto switch –off mode.

The iron is now ready for use.

3. Simply moving the iron, it will back on and the auto switch-off function

Wait for one more cycle; pilot light glows and goes off. –

shall be wyzerowana. You will hear a sound signal, the pilot light shall

After nishing move the – Temperature Dial (2) in anti-clockwise

go off, whereas the pilot light indicating heater in operation shall

direction to „MIN”; the iron is switched off.

glow (11) – the iron shall reheat again.

Disconnect the iron from mains supply outlet. –

Hold the iron horizontally over a sink. –

AUTO SHUT-OFF IN VERTICAL POSITION

Press and hold the – Self-Cleaning Knob (8).

1. The iron will switch off automatically after approximately 5-10 min-utes,

Steam and boiling hot water will drain from the holes on the soleplate –

if it is immobile in the rest position (vertical).

washing away the scales and minerals that have built up inside the

2. You can hear a sound signal. The auto switch-off pilot light (4), shall

Steam Chamber.

ash indicating that the iron changed to auto switch –off mode.

3. Simply moving the iron, it will back on and the auto switch-off func-tion

Ecology – Environment protection

shall be wyzerowana. You will hear a sound signal, the pilot light shall

Each user can protect the natural environment. It is neither

go off, whereas the pilot light indicating heater in operation shall

difcult nor expensive.

glow (11) – the iron shall reheat again.

In order to do it: put the cardboard packing into recycling

Attention: Each time usage – moving the iron shall bring it back to

paper container; put the polyethylene (PE) bags into

the previous setting. The iron will take about 60 seconds to reach its

container for plastic.

previous temperature setting.

When worn out, dispose the appliance to particular disposal

centre, because of the dangerous elements of this appliance,

Draining the water

which can be hazardous for natural environment.

Move the – Steam Control Knob (7) to

Do not dispose into the domestic waste disposal!!!

position.

Disconnect the iron from mains supply –

outlet.

Press the – Burst of Steam Button (9),

to release any trapped water when the

soleplate still hot.

Press the – Spray Buttons (10), to release

any trapped water.

Turn the iron upside down and gently shake –

it to remove the remaining water.

Before storage make sure that Steam

Control Knob (7) is in position.

Cleaning and maintenance

Disconnect the iron from mains supply outlet. –

The iron should get cool completely before cleaning. –

Use a damp cloth and gentle washing liquid for cleaning. –

Do not use aggressive detergents like cream, milk, paste etc. to –

clean the casing. They can remove graphic symbols such as: scales,

marking, caution signs, etc.

Never use sharp or rough objects to remove the deposits on the sole –

plate.

Never use any abrasive, vinegar or descaling agents to clean the iron. –

The manufacturer/importer does not accept any liability for any damages resulting

from unintended use or improper handling.

The manufacturer/importer reserves his rights to modify the product any time in

order to adjust it to law regulations, norms, directives, or due to construction, trade,

aesthetic or other reasons, without notifying in advance.

84 GW28-029_v02