Vitek VT-1652: ENGLISH

“Grill” button

defrosting process. The current time setting will

Press to set the grill-mode cook time. The

be erased if the microwave oven is

maximum cook time is 99 min. 99 sec.

disconnected from AC power.

“Combination 1&2” button

“Memory” button

Press to set the cook time in combination cook

Use the “MEMORY” button to program

mode.

cooking processes, made up of several steps:

defrost and food preparation in microwave,

“Weight defrost” button

combo or grill modes.

Press to defrost one of 3 types of products:

Meat, poultry, and seafood. Upon choosing a

Using the oven

category of food and entering the weight, the

Audible signal

defrost time and power level are set

Each time you press a button on the control

automatically.

panel, you will hear an audible signal.

“Jet defrost” button

Setting the current time

Designed to defrost food according to a set

Let’s say you need to set the current time as

time. The defrost process begins on the highest

“6:00” (AM or PM):

power level and automatically lowers gradually.

1. Press the “CLOCK” button.

An indicator will be displayed on the screen

2. Press the “CANCEL” button.

during the entire defrost cycle.

3. Press the “1 MIN” button 6 times.

4. Press the “CLOCK” button to confirm the

“Express” button

set time.

Press to choose one of 4 set microwave

Note: this model uses a 12-hour time format. To

preparation modes according to time.

see the time while the microwave is in

operation, press the “CLOCK” button.

“Power” button

Use to set the power level. To check the current

Setting the cook time and power level

power level during microwave operation,

Let’s say you need to set a cook time of 5

simply press the POWER button.

minutes at a 60% power level:

1. Press the “Microwave” button.

“Pre-set” button

2. Press the “1 MIN” button 5 times.

Press to set the time when the oven should

3. Press the “Power” button 3 times.

begin food preparation according to the set

4. Press the “Start” button.

program. The “PRE-SET” indicator will blink

Note: when cooking at 100% power level, step

until the time is entered. Note: The current time

3 is not necessary.

should be set before programming the “PRE-

SET” function.

Setting the pre-set program cook time

Let’s say you want the microwave to start

“Cancel” button

cooking at 2:00 (AM or PM):

Press to cancel the previously set power level,

1. Press the “PRE-SET” button.

cook program or defrost time. Note: the

2. Press the “1 MIN” button 2 times.

“CANCEL” function does not affect the current

3. Set the desired cooking program.

time.

4. Press the “START” button.

“Start” button

Note: verify that the correct current time was

Press to start the cooking or defrost process

set previously.

according to the set program.

When the settings are complete, the “PRE-

SET” indicator will blink while waiting for the

“Clock” button

programmed time. At 2:00, the cooking process

Press to set the current time. The current time

will begin according to the set program.

will be displayed except during the cooking or

Vt-1652.qxp 04.02.2005 9:45 Page 5