Vitek VT-1652: ENGLISH

MICROWAVE OVEN

INSTALLATION

1. Make sure to remove the packing material

Parts List

from the microwave oven.

1. Protective locks

2. Systematically check the oven for any

2. Window

damage. Do not use the oven if the locks or

3. Ventilation openings

door are broken, or if there is damage to the

4. Axis

internal parts of the oven. Contact a service

5. Roller ring

center if you find these types of damage.

6. Rotating tray

3. The oven should be installed on a flat, stable

7. Control panel

surface.

8. Heating element

4. Do not install the oven near sources of high

9. Grill cover

temperatures or humidity.

10. Steamer kit

5. Provide for proper ventilation of the oven,

by leaving the following free space around

PRECAUTIONS, WHICH MUST BE

the oven: above - 20 cm, behind - 10 cm, on

FOLLOWED IN ORDER TO AVOID

the sides - 5 cm each.

EXPOSURE TO MICROWAVE ENERGY

6. Do not use the oven without the glass tray.

1. Do not attempt to use the microwave oven

Install the tray and other accessories

when the door is open as you risk exposure

correctly.

to harmful microwave energy. It is very

7. Place the rotating tray into the oven; match

important not to damage or ruin the internal

the grooves on the axis with the lip of the

protective locks.

tray. Make sure that it is properly installed

2. It is especially important that the door be

on the roller ring and that the ring is inside

closed firmly. Do not place foreign objects

the central circle on the bottom of the oven.

between the door and the microwave body

and make sure that dirt and/or cleaning

GROUNDING INSTRUCTIONS

liquids do not drip into the insulative layer.

This device should be grounded. In case of

3. Do not use the microwave oven if it is

short-circuit, the ground reduces the risk of

damaged; especially make sure that:

electric shock because the power surge can

a. the door is not bent;

leave through the grounding wire. A grounded

b. the hooks and locks are not broken or

cord and plug has been supplied with this

weakened;

microwave oven. The plug is then connected to

c. the door’s insulative layer has not been

an outlet that has been grounded properly.

damaged.

WARNING: The use of a grounded outlet, as a

4. Only a qualified specialist should maintain

rule, does not lead to the risk of electric shock.

or service the microwave oven.

Consult with qualified service specialists if the

BEFORE CONTACTING A SERVICE

grounding instructions are not clear or if you

CENTER

are unsure as to whether or not your oven is

1. Make sure that the oven is correctly

properly grounded.

connected to AC power. If there is a

problem with this, unplug the cord from the

Radio static

power source, wait 10 seconds, then

1. Use of the microwave oven can create static

reconnect the oven to power.

for radios, television, and other devices

2. Check if power is being supplied.

operating nearby.

3. Make sure the control panel is programmed

2. To avoid static:

correctly and that the timer is not activated.

a) firmly close the microwave oven door;

4. Make sure the door is closed and latched

b) adjust the antenna on the radio or television;

while the oven is operating.

c) relocated the oven farther from the device;

d) connect the microwave oven to a different

outlet in order to avoid interference of the

devices.

Vt-1652.qxp 04.02.2005 9:45 Page 3