Vitek VT-1557: WARMING-UP PRODUCTS

ENGLISH

• Set the steam sprayer (7).

and one of the two programmed cooking

• Set the mesh filter (11) in the special re-

modes “Р1” and “Р2”. The corresponding

cess in the water tank (10).

indication of the product, cooking time

• Fill the water tank (10) with cold water up

and heating time will light up on the LCD-

to the МАХ mark.

display (17).

• You can fill the water tank with water in two

• After selecting one of the auto cooking

ways: - through the fill port (9) (Pic. 1) or

modes you can change the preset cook-

directly in the water tank (Pic. 2).

ing time, using the (18) buttons.

• If while cooking you will find that there

• Press the (19) button to start cooking/

is not enough water you can add water

through the fill port, (9), without removing

heating products, the (

) or (

the steam bowls (Pic. 1).

) symbol will be flashing on the LCD-dis-

play.

Use filtered water; it has lower hardness,

• After the cooking time is finished, two

and it will allow reducing scaling on the heat-

sound signals will be heard and the Steam

ing element. Do not exceed the MAX mark

cooker will switch to the heating mode,

while filling the water tank with water.

heating time is 20 minutes (the (

) symbol will be flashing on the LCD-dis-

Warning

play.

- Do not add any salt, pepper, seasonings,

• After heating is finished you will hear 5

herbs, wine, sauces or other liquids to the

sound signals, and the Steam cooker will

water tank. It may lead to damages of the

switch to the heating mode, in a minute

unit.

two sound signals will be heard and the

- Change water for every usage of the unit.

Steam cooker will switch off.

• Place the tray for the condensate collec-

tion (6) on the water tank (10) and make

Note:

sure that it is set properly.

in the heating mode you can change

• Set one or more steam bowls (1-2-3) on

heating time using the (18) buttons.

the tray.

• Close the steam bowl with the Lid (5).

• To stop cooking or heating, press the (19)

• Insert the plug into the socket, a sound

signal will be heard and the LCD-display

button, the (

) or ( ) symbols will

will light up; the Steam cooker is ready to

be on constantly.

operate within 45 minutes.

• Press the (15) button to switch off the unit,

or wait till it switches off automatically

Note:

if no actions are performed during 1

WARMING-UP PRODUCTS

minute two sound signals will be heard

• Use the (17) button to select the heating

and the Steam cooker will switch off.

mode, the (

) symbol, use the (18)

• Switch on the Steam cooker by pressing

buttons to set the necessary heating time

the (15) button, the LCD-display (14) will

from 1 to 99 minutes, press the (19) but-

light up and you will hear a sound signal.

ton to switch on the unit.

• Use the auto cooking mode selection

• After heating is finished you will hear 5

button (17) to select one of the operat-

sound signals, in a minute two sound sig-

ing modes: cooking eggs, fish, vegeta-

nals will be heard and the Steam cooker

bles, meat, chicken, rice, heating mode,

will switch off.

5

1557.indd 51557.indd 5 14.02.2008 9:15:3414.02.2008 9:15:34