Vitek VT-1557: Automatic switch off No water indication Timer setting TIPS

ENGLISH

Programming of cooking modes

• In the standby mode, you can switch off

You can program cooking modes yourself.

the timer by pressing the (16) button.

• Insert the plug into the socket

• Switch on the Steam cooker, by pressing

Automatic switch off

the (15) button, the LCD-display (14) will

If you have not used the Steam cooker for a

light up and you will hear a sound signal.

minute it will switch off automatically. Before

• Press and hold the (17) button for 3 sec-

switching off you will hear two sound sig-

onds, the “Р1:00” symbols will start flashing

nals. You can stop cooking process during

on the LCD-display. Set the desired cooking

operation, by pressing the (19) button, and

time, using the (18) buttons and press the

pressing the (15) button will switch off the

(19) button to store the entered value.

Steam cooker.

• To set the cooking time for the second

mode press the (17) button till the “Р2:00”

No water indication

symbols appears on the LCD-display. Set

If water level in the water tank (10) is lower

the desired cooking time, using the (18)

than the MIN mark, you will hear a sound

buttons and press the (19) button to store

the entered value.

signal and the (

) symbol will be flash-

ing on the LCD-display.

Timer setting

Fill the water tank (10) with cold water to the

You can set delay time for the Steam cooker

МАХ mark.

to switch on.

You can fill the water tank with water in two

ways: - through the fill port (9) (Pic. 1) or di-

• Press the (16) button. The (

) and the

rectly in the water tank (Pic. 2).

“00:00” symbols will appear on the LCD-

display.

ATTENTION!

• Use the (18) buttons to set the delay

• During operation do not touch the Lid or

time for the Steam cooker to switch on.

the steam bowls – they are very hot.

Minimal delay time is 5 minutes, maxi-

• To avoid getting burns use pot holders

mal 23 hours 55 minutes, setting step is 5

when removing the Lid and the steam

minutes. Press the (19) button to confirm

bowls. Slowly raise the Lid up to release

the preset time.

steam, hold the Lid over the steam bowl to

• Use the (15) button to select the desired

drain water.

operating mode and then press the (19.)

• If you want to check on the cooking

button again.

progress, use a utensil with a long han-

• The timer symbol, operating mode sym-

dle.

bol and time symbol (time in which the

• Remember that water inside the water

cooking process will start) will appear on

tank can be hot when all the other compo-

the LCD-display.

nents are cooled down.

• After cooking is finished you will hear a

• Do not use the Steam cooker without the

sound signal and the Steam cooker will

tray, the steam bowls or the Lid.

switch to the 20 minute-heating mode

TIPS

automatically. (The (

) symbol will be

• Cook meat, fish and seafood till it is

flashing on the LCD-display).

cooked completely.

• After heating is finished you will hear 5

• Always use only defrost products, exclud-

sound signals, in a minute two sound sig-

ing vegetables, fish and seafood.

nals will be heard and the Steam cooker

• If you use several steam bowls at a time,

will switch off.

put meat, chicken or fish in the lower bowl

6

1557.indd 61557.indd 6 14.02.2008 9:15:3414.02.2008 9:15:34