Vitek VT-1513: DESCRIPTION IMPORTANT SAFEGUARDS PREPARATION TO OPERATION

ENGLISH

COFFEE MAKER

to the off position and remove the plug out of the

socket. While unplugging the unit, take its plug,

DESCRIPTION

do not pull its cord.

1 – Housing

• Make sure that the power cord does not hang

2 – Platform for warming the cups

over the table, and does not touch hot surfac-

3 – Water tank lid

es.

4 – Removable water tank

• Do not place the unit on heated surfaces.

5 – Ready indicator

• Do not use the coffee maker when the power

6 – Operating modes knob

cord or the plug are damaged, in case of mal-

7 – Cappuccinator pipe with a tip

function or after damages.

8 – Filter clamp

• Do not repair the unit yourself. Apply to the near-

9 – Drip tray

est authorized service center for repair.

10 – Tray grid

• Keep the unit out of reach of children.

11 – Filter holder handle

• Do not allow children to use the unit as a toy.

12 – Filter holder

• This unit is not intended for usage by children

13 – Coffee filter

or disabled persons unless they are given all the

14 – ON/OFF button

necessary instructions on safety measures and

15 – Power indicator

information about danger, which can be caused

16 – Measuring spoon with a ground coffee densi-

by improper usage of the unit.

fier

• Do not use the coffee maker outdoors.

• Never leave the coffee maker in places, where

IMPORTANT SAFEGUARDS

the temperature is below 0°C.

While using electrical appliances, basic safety

• The unit is intended for household usage only.

measures should always be followed including the

following:

KEEP THESE INSTRUCTIONS

• Read all the instructions carefully.

• Use the coffee maker only for its intended pur-

PREPARATION TO OPERATION

poses.

• Make sure that the button (14) is in the “OFF”

• Make sure that the mains voltage corresponds

position, and the knob (6) – is in the “

” posi-

to the voltage specified on the housing of the

tion.

unit.

• Before using the unit for the first time, wash all

• Use the plug with a secure grounding.

removable parts with warm water and wipe them

• In order to reduce risk of fire, do not use adapt-

with a dry cloth.

ers while connecting the unit to the wall outlet.

• Before switching on the unit, make sure that the

• Place the unit on the flat stable surface.

mains voltage corresponds to the voltage speci-

• Do not switch on the unit without water.

fied on the housing of the unit.

• Before switching on the unit, make sure that the

• Remove the tank (4), fill it with cold water till the

On/Off button is in the off position.

MAX mark and place on its place.

• Use only the accessories supplied.

• Insert the coffee filter (13) into the holder (12),

• Before using the coffee maker, make sure that

by matching the ledge on the filter (13) with the

all removable parts are set properly.

hole on the holder (12) and turn the filter (13)

• Do not touch hot surfaces of the unit.

clockwise/anticlockwise.

• Be careful while operating with outgoing steam.

• Place the filter holder into the coffee maker.

• Do not take off the filter holder during operation

Holder ledges (12) should match the groves on

of the unit.

the boiler, and then turn the filter holder handle

• In order to avoid fire, electric shock or physical

(11) to the right till the clamp.

damages, do not immerse the power plug, the

• Place the corresponding cup on the tray grid

power cord or the housing into water or other

(10).

liquids.

• Inset the plug into the socket.

• Always unplug the unit, when you do not use the

• Switch on the unit by pressing the ON/OFF (14),

unit or before cleaning.

button, the indicator (15) will light up.

• Let the unit cool down completely before clean-

• To fill the boiler with water set the knob (6) to the

ing and removing the attachments.

“

” position, in 15-20 seconds or when wa-

• To switch the unit off, set all the control buttons

ter starts appearing in the cup, switch off water

3

3

1513.indd 31513.indd 3 10.06.2010 15:21:4810.06.2010 15:21:48