AEG TS 55 E: English

15

English

    WARNING! Read all safety warnings and all 

instructions, including those given in the accompanying 

brochure.

Failure to follow the warnings and instructions may result in electric 

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Cutting procedures

 Danger: Keep hands away from cutting area and the 

blade. Keep your second hand on auxiliary handle, or motor 

housing. 

If both hands are holding the saw, they cannot be cut by 

the blade.

Do not reach underneath the workpiece. 

The guard cannot 

protect you from the blade below the workpiece.

Adjust the cutting depth to the thickness of the workpiece. 

Less than a full tooth of the blade teeth should be visible below the 

workpiece.

Never hold piece being cut in your hands or across your leg. 

Secure the workpiece to a stable platform.

 It is important to 

support the work properly to minimize body exposure, blade binding, 

or loss of control.

Hold the power tool by insulated gripping surfaces only, 

when performing an operation where the cutting tool may 

contact hidden wiring or its own cord. 

Contact with a „live“ wire 

will also make exposed metal parts of the power tool „live“ and could 

give the operator an electric shock.

When ripping always use a rip fence or straight edge guide.

This improves the accuracy of cut and reduces the chance of blade 

binding.

Always use blades with correct size and shape (diamond 

versus round) of arbour holes.

 Blades that do not match the 

mounting hardware of the saw will run eccentrically, causing loss of 

control.

Never use damaged or incorrect blade washers or bolt.

 The 

blade washers and bolt were specially designed for your saw, for 

optimum performance and safety of operation.

Kickback causes and related warnings

- kickback is a sudden reaction to a pinched, bound or misaligned saw 

blade, causing an uncontrolled saw to lift up and out of the workpiece 

toward the operator;

- when the blade is pinched or bound tightly by the kerf closing 

down, the blade stalls and the motor reaction drives the unit rapidly 

back toward the operator;

TECHNICAL DATA

Circular saw

TS 55 E

Production code

4192 91 01...

4109 16 01...

... 000001-999999

Rated input

1500 W

No-load speed

5500 min

-1

Saw blade dia. x hole dia

Max. Cutting depth at 45°

Max. Cutting depth at 90°

160 x 20 mm

39 mm

55 mm

Weight according EPTA-Procedure 01/2003

5,4 kg

Noise/Vibration Information 

Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K=3dB(A)) 

Sound power level (K=3dB(A))

Wear ear protectors!

93 dB(A)

104 dB(A)

Total vibration values (vector sum in the three axes) determined according to EN 60745.

Vibration emission value a

h

Uncertainty K=

4,7 m/s

2

1,5 m/s

2

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and 

may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with 

different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total 

working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running 

but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep 

the hands warm, organisation of work patterns.

GB