AEG BSS 4803: English

English

31

First Use of the Device/Introduction

General Operation

Switch device on/off

NOTE:

• Thedeviceisoperatedprimarilywiththeremotecon-

• Withthe

button (11), you can switch the unit between

trol. Thus the descriptions refer to the buttons on the

standby and operating mode. In standby, the pilot lamp

remote control. Some buttons are also on the device.

(7 on the device) lights red.

Buttons with the same name have the same function.

• Todisconnecttheunitcompletelyfromthemains,pull

• Thebuttonsonthedevicearetouchbuttons.Touchthe

the mains plug from the socket.

keys lightly with a finger to perform the function.

NOTE:

• Selectaproperplaceforthedevice.Adry,levelandslip

Keep the button (2) on the unit pressed to toggle the

proof surface is suitable.

unit between standby and operating mode.

• Makesurethedeviceisventedsufciently!

• Removetheprotectivelmfromthedevice,ifpresent.

Volume

By pressing the VOL+/VOL- buttons (6/3) you can adjust the

Power supply

desired volume.

• Insertthegridplugintoaproperlyinstalledthreeprong

socket with 230 V, 50 Hz.

Infrared Remote Control

• Makesurethegridvoltagecorrespondstothegureson

For wireless control within a distance of 5 m. If the distance

the rating plate.

decreases you should change the batteries. For proper

NOTE:

operation mind a clear view between the remote control and

Disconnect from mains power supply during longer periods

the sensor on the device.

of non-use.

Sound Settings

If necessary, change the EQ setting in your playback unit to

Insert/Replace Battery in Remote Control

create the best sound.

• Openthebatterycompartmentontheundersideofthe

remote.

MUTE (9)

• InsertAAA/R031.5Vtypebatteries.Payattentiontothe

For immediate muting of the volume. Press MUTE again to

correct polarity (see bottom of battery compartment)!

cancel the function.

• Closethebatterycompartment.

If the remote is not in use for a lengthy period of time, please

NOTE:

remove the battery to prevent the battery acid from “leaking”.

The activated setting is shown on the display by the “

”

symbol.

WARNING:

• Donotexposethebatteriestointenseheat,suchas

sunlight, fire or similar. Danger of explosion!

Playing back music files

• Keepbatteriesoutofthereachofchildren.Theyare

not toys.

You have three options to play back your own music files with

• Donotforcebatteriesopen.

the unit: hardwired, wireless via Bluetooth, or via the USB

• Avoidcontactwithmetallicobjects.(Rings,nails,screws

port.

etc.) Danger of short circuits!

• Shortcircuitsmayoverheatorevenignitebatteries.

By cable

This may lead to combustion.

1. Connectthe3.5mmstereoRCAcabletoanexternal

• Whentransportingthebatteries,covertheterminalsfor

audio source. If required, use a suitable adapter (not

your safety with an adhesive strip.

included).

• Ifabatteryleaks,donotrubtheuidintotheeyesor

2. Insert the other end of the cable into the AUX-IN jack

the skin. If acid comes into contact with the eyes, rinse

(Back Side) on the unit.

with purified water and seek medical advice if symp-

3. Repeatedly press the MODE button (2/1) until “AUX” is

toms persist.

shown on the display.

4. Start the playback of your audio source. Listen to the

CAUTION:

sound playback via the speaker. You can adjust the

• Differentbatterytypesornewandusedbatteriesmay

volume using the VOL+/VOL- buttons (6/3).

not be used together.

5. For the further procedure, please refer to the user manual

• Batteriesmustnotbedisposedofinthegarbage.

oftheexternalaudiosource.

Please bring used batteries to competent collection

centers or back to the dealer.