Acer TravelMate P253-M – страница 4

44

ExpressCard

ExpressCard

ExpressCards support a vast number of expansion options, including flash

memory card adapters, TV-tuners, Bluetooth connectivity and IEEE 1394b

adapters. ExpressCards support USB 2.0 and PCI Express applications.

Important: There are two types, ExpressCard/54 and

ExpressCard/34 (54 mm and 34 mm), each with different

functions. Not all ExpressCard slots will support both types.

Please refer to your card’s manual for details on how to install

and use the card, and its functions.

Inserting an ExpressCard

Insert the card into the slot and push gently until it

clicks into position.

Ejecting an ExpressCard

Before ejecting an ExpressCard:

1. Exit the application using the card.

2. Left-click the remove hardware icon on the

taskbar and stop the card operation.

3. Push the card gently into the slot and release to

pop out the card. Then pull the card free from

the slot.

45

Thunderbolt

Thunderbolt is a high-speed connection that supports storage devices as

well as external displays. It is compatible with the DisplayPort standard.

Note: Up to six Thunderbolt devices and one DisplayPort display can

be daisy-chained, however, the DisplayPort display will be the last

device in the chain, and it cannot be preceeded by a Thunderbolt

display.

46

IEEE 1394 port

IEEE 1394 port

The computer's IEEE 1394 port allows you to connect to an IEEE 1394-

compatible device like a video camera or digital camera. See your video or

digital camera's documentation for details.

47

HDMI

HDMI (High-Definition Multimedia Interface) is an industry-supported,

uncompressed, all-digital audio/video interface. HDMI provides an

interface between any compatible digital audio/video source, such as a

set-top box, DVD player, and A/V receiver and a compatible digital audio

and/or video monitor, such as a digital television (DTV), over a single

cable.

Use the HDMI port on your computer to connect with high-end audio and

video equipment. Single cable implementation allows tidy setup and fast

connection.

48

Universal Serial Bus (USB)

Universal Serial Bus (USB)

The USB port is a high-speed serial bus which allows you to connect USB

peripherals without taking up system resources.

49

Playing DVD movies

When the DVD drive module is installed in the optical drive bay, you can

play DVD movies on your computer.

1. Insert a DVD.

2. The DVD movie will automatically play after a few seconds.

Important: When you launch the DVD player for the first time, the

program asks you to enter the region code. DVDs are available

for 6 regions.

Region code Country or region

1 USA, Canada

2 Europe, Middle East, South Africa, Japan

3 Southeast Asia, Taiwan, South Korea

4 Latin America, Australia, New Zealand

5 Former USSR, parts of Africa, India

6 People’s Republic of China

Note: To change the region code, insert a DVD movie of a different

region into the DVD drive.

Once your DVD drive is set to a region code, it will only play

DVDs for that region. You can set the region code a maximum of

five times (including the first time), after which the last region

code set will remain permanent.

Recovering your hard disk does not reset the number of times

the region code has been set.

50

Upgrading memory

Upgrading memory

Follow these steps to install memory:

1. Turn off the computer, unplug the AC adapter (if connected) and remove

the battery pack. Then turn the computer over to access its base.

2. Remove the screws from the memory cover; then lift and remove the

memory cover.

3. (a) Insert the memory module diagonally into the slot, then (b) gently

press it down until it clicks into place.

4. Replace the memory cover and secure it with the screw.

5. Reinstall the battery pack, and reconnect the AC adapter.

6. Turn on the computer.

The computer automatically detects and reconfigures the total memory

size.

51

BIOS utility

The BIOS utility is a hardware configuration program built into your

computer's BIOS.

Your computer is already properly configured and optimized, and you do

not need to run this utility. However, if you encounter configuration

problems, you may need to run it.

To activate the BIOS utility, press <F2> during the POST while the

computer logo is being displayed.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then

select Boot from the categories listed at the top of the screen.

Setting passwords

To set a password on boot, activate the BIOS utility, then select Security

from the categories listed at the top of the screen. Find Password on

boot: and use the <F5> and <F6> keys to enable this feature.

52

Frequently asked questions

Frequently asked questions

The following is a list of possible situations that may arise during the use

of your computer. Easy solutions are provided for each one.

I turned on the power, but the computer does not start or boot up

Look at the power indicator:

• If it is not lit, no power is being supplied to the computer. Check the

following:

• If you are using on the battery, it may be low and unable to power the

computer. Connect the AC adapter to recharge the battery pack.

• Make sure that the AC adapter is properly plugged into the computer

and to the power outlet.

• If it is lit, check the following:

• Is a disc in the optical drive? Remove it and press <Ctrl> + <Alt> +

<Del> to restart the system.

• Do you have a USB storage device (USB disk or smartphone)

plugged into your computer? Unplug it and press <Ctrl> + <Alt> +

<Del> to restart the system.

Nothing appears on the screen

The computer’s power management system automatically blanks the

screen to save power. Press any key to turn the display back on.

If pressing a key does not turn the display back on, three things might be

the cause:

• The brightness level might be too low. Press <Fn> + < > (increase) to

adjust the brightness level.

• The display device might be set to an external monitor. Press the

display toggle hotkey <Fn> + <F5> to toggle the display back to the

computer.

• If the Sleep indicator is lit, the computer is in Sleep mode. Press and

release the power button to resume.

No audio is heard from the computer

Check the following:

• The volume may be muted. In Windows, look at the volume control

(speaker) icon on the taskbar. If it is crossed-out, click the icon and

deselect the Mute all option.

53

• The volume level may be too low. In Windows, look at the volume

control icon on the taskbar. You can also use the volume control buttons

to adjust the volume.

• If headphones, earphones or external speakers are connected to the

line-out port on the computer, the internal speakers automatically turn

off.

I want to eject the optical drive tray without turning on the power

There is a mechanical eject hole on the optical drive. Simply insert the tip

of a pen or paperclip into the hole and push to eject the tray.

The keyboard does not respond

Try attaching an external keyboard to a USB port on the computer. If it

works, contact your dealer or an authorized service center as the internal

keyboard cable may be loose.

The printer does not work

Check the following:

• Make sure that the printer is connected to a power outlet and that it is

turned on.

• Make sure that the printer cable is connected securely to a USB port

and the corresponding port on the printer.

Requesting service

International Travelers Warranty (ITW)

Your computer is backed by an International Travelers Warranty (ITW)

that gives you security and peace of mind when traveling. Our worldwide

network of service centers are there to give you a helping hand.

An ITW passport comes with your computer. This passport contains all

you need to know about the ITW program. A list of available, authorized

service centers is in this handy booklet. Read this passport thoroughly.

Always have your ITW passport on hand, especially when you travel, to

receive the benefits from our support centers. Place your proof-of-

purchase in the flap located inside the front cover of the ITW passport.

If the country you are traveling in does not have an Acer-authorized ITW

service site, you can still get in contact with our offices worldwide. Please

visit www.acer.com.

60

Frequently asked questions

How do I install apps?

You can download Windows Store apps from Store. You will need to have

a Microsoft ID to purchase and download apps from Store.

I can't find apps like Notepad and Paint! Where are they?

From Start you can simply start typing the name of the app you're looking

for to open Search and list the results. Alternatively, open All apps and

scroll to ’Windows Accessories’ to see the list of legacy programs.

What is a Microsoft ID (account)?

A Microsoft account is an email address and password that you use to

sign in to Windows. You can use any email address, but it is best if you

choose the one you already use to communicate with friends and sign in

to your favorite websites. When you sign in to your PC with a Microsoft

account, you'll connect your PC to the people, files, and devices you care

about.

Do I need one?

You do not need a Microsoft ID to use Windows 8, but it makes life easier

because you can sync data across different machines you sign in to using

a Microsoft ID.

How do I get one?

If you've already installed Windows 8 and didn't sign in with a Microsoft

account or you don't have a Microsoft account and want to get one, press

the Windows key + <C> and click Settings > Change PC settings >

Users > Switch to a Microsoft account, and follow the onscreen

instructions.

How do I add a favorite to Internet Explorer?

Internet Explorer 10 doesn't have traditional favorites, instead you can pin

shortcuts to Start. Once you have the page open, right-click anywhere on

the page to open the menu at the bottom of the screen. Click Pin to Start.

How do I check for Windows updates?

Press the Windows key + <C> and click Settings > Change PC settings

> Windows Updates. Click Check for updates now.