Vitek VT-1511: PREPARATIONS BEFORE OPERATION MAKING ESPRESSO

ENGLISH

PREPARATIONS BEFORE OPERATION

- Do not remove the filter holder (12) im-

• Make sure that all functional buttons (13,

mediately after preparing coffee as

14, 17) are in the off position.

there is redundant water vapor pressure

• To make sure that the steam supply is

inside, let the coffee maker cool down

blocked, turn the handle (5) clockwise till

completely.

the clamp.

- To remove the filter holder (12) turn the

• Before using the unit for the first time,

handle to the left and remove the holder.

wash all removable parts with warm wa-

ter and wipe them with a dry cloth.

MAKING ESPRESSO

• Before switching on the unit, make sure

• Make sure that all functional buttons (13,

that voltage of your home electric main

14, 17) are in the off position.

corresponds to the voltage specified on

• To make sure that the steam supply is

the unit.

blocked, turn the handle (5) clockwise till

• Remove the tank (3), fill it with cold water

the clamp.

till the MAX mark and place on its place.

• Remove the tank (3), fill it with cold water

• Insert the filter (6) into the holder (12), by

till the MAX mark and place on its place.

matching the ledge on the filter (6) with

• Insert the filter (6 or 19) into the holder

the hole on the holder (12) and turn the

(12), by matching the ledge on the filter

filter (6) clockwise/anticlockwise.

(6) with the grove on the holder (12) and

• Place the filter holder into the coffee

turn the filter (6) clockwise/anticlock-

maker. Holder ledges (12) should match

wise.

the groves on the boiler, and then turn

• Fill the filter (6) with the ground coffee:

the filter holder handle (8) to the right till

2 full measuring spoons – to make two

the clamp.

coffee cups and 1 full spoon - to make

• Place the corresponding cup on the cov-

one coffee cup, slightly tamp the ground

er of the tray (10).

coffee by the back side of the measuring

• Inset the plug into the socket.

spoon (18).

• Switch on the unit by pressing the ON/

• Place the filter holder into the coffee

OFF (17) button, the indicator (16) will

maker. Holder ledges (12) should match

light up.

the groves on the boiler, and then turn

• To fill the boiler with water press the (13)

the filter holder handle (8) to the right till

button in 15-20 seconds or when water

the clamp.

starts appearing in the cup, switch off

• Put one or two cups on the tray lid (10).

water supply, by pressing the (13) button

• Inset the plug into the socket.

once again.

• Switch on the unit by pressing the ON/

• Wait till the indicator (15) lights up, then

OFF (17) button, the indicator (16) will

switch on water supply, by pressing the

light up.

(13) button, when the cup is filled with

• Wait till the indicator (15) lights up, the

water, press the (13) button once again

unit is ready for making coffee.

to switch off water supply, pour out water

• Switch on water supply, by pressing the

from the cup. Depending on the cup size,

(13) button; watch the process of the cup

repeat this procedure several times, then

filling with coffee, press the (13) button

the boiler will be washed.

once again to switch off water supply.

Attention!

• Switch off the coffee maker by pressing

- Do not remove the filter holder (12) if the

the (17) ON/OFF button, the indicator

(13), (14) buttons are pressed

(16) will go out.

4

4

1511.indd 41511.indd 4 03.02.2010 15:36:1603.02.2010 15:36:16